Rear Door Locks Broke-Help!
#1
Newbie
Thread Starter
Join Date: May 2011
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Rear Door Locks Broke-Help!
I have a 2001 Cherokee sport and the right rear door lock broke a few months ago (pushing in the door handle button from the outside I get no resistance and the door won't open, also it seems the inside door lock/unlock paddle is stuck in between lock and unlock). Today my back driver side door lock in malfunctioning. I feel resistance from the outside handle but the door will still not open, it also appears the lock/unlock paddle is stuck between lock/unlock as well. Does anyone have any suggestion as to what may be the problem and how I can fix it? thanks for your help.
#2
CF Veteran
Join Date: Jun 2009
Location: Michigan
Posts: 2,131
Received 288 Likes
on
238 Posts
Year: 1987 MJ, 1998 XJ, 1973 J2000, 89 waggy
Model: Comanche (MJ)
Engine: 4.0L H.O
its one of those jeep things.... way more common in the older models than it is in the newer models.... every one of my older model XJ's rear doors either failed to open over time or failed to open from the day i got them....
you'll have to pull the door panel and take out the door latch... either replace it or go for a good cleaning/overhaul.... after the grease and lube wear out the latch gums up and sticks......
you'll have to pull the door panel and take out the door latch... either replace it or go for a good cleaning/overhaul.... after the grease and lube wear out the latch gums up and sticks......
#3
Seasoned Member
Join Date: Oct 2009
Location: Tucson AZ
Posts: 416
Likes: 0
Received 0 Likes
on
0 Posts
Year: 94
Model: Cherokee
Engine: 4.0
Pop door panel off, get door open and adjust thru the angled slot. use allen wrench loosen bolt and slide it towards the outside with allen wrench. retighten and try it.
#5
Seasoned Member
Join Date: Oct 2009
Location: Tucson AZ
Posts: 416
Likes: 0
Received 0 Likes
on
0 Posts
Year: 94
Model: Cherokee
Engine: 4.0
Around the edge of the door theres plastic tabs that are attached to the door panel and push into holes in the door. I used a flat blade screwdriver that I bent at a 45 deg angle about 2 in from the end to reach between the door panel and door. Slid it around the edge till I found a tab and pried the panel away from the door.
#7
Member
Join Date: Jan 2011
Location: Modesto, CA
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
x2 for me, my driver's door won't open for nothing either. I've tried wd-40 and working it in but i still can't get her open. any suggestions? can i take off the latch mechanism from the inside and get one from a junkyard or something?
Thread
Thread Starter
Forum
Replies
Last Post
Rotorhead
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
20
09-23-2023 04:17 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)