a1racer

i have been thinking about getting some straps for the front and rear just wondering if any body is using any and how you mounted them if you are

warrpath4x4

Mines still stock but when I lift it I will be putting them up front

a1racer

well this is what i use for a rear shock mount so i have been thinking about mounting straps from here to the lower shock bolt to prevent my bilstiens from getting wrecked http://store.jksmfg.com/merchant2/me...ory_Code=Shock

a1racer

no body uses limiting straps

OverlandZJ

I'm about to order a set before NAC-Fest. This place seems to have good pricing on 2" straps and will make them to whatever length you need.

http://www.djsafety.com/TiedownAccessMount.html

I think to make it easy on myself i'm going to order them 1/2" shorter than my Bilstein's total length and mount them alongside with the shock mounting bolts. Make sense?

89eliminator

i use them. got em from polyperformance.com. 20" strap mounted from lower arm to frame. nothing in the rear cause i dont care about those shocks.

BuckB91XJ

My shocks are too short to need limiting straps. The shocks are limiting my droop, now, and If I blow one of these cheesey shocks...COOL, because I want to get a set of new LOOOOOOOONGER Bilsteins, anyway.

Metmknice

Does make sense for the rear, but it is not as much to worry about with the leaf springs. Front is definitely more concern as upon launch or being off the ground the coils could loosen up as well.

a1racer

Yeah that is kinds what I am thinking in the rear. For the front I am thinking of using the sway mounts on the axle since I don't run a sway then makeing up a frame mount

a1racer

ok so about a 26 inch strap for the rear is what i need that way it leaves about 2 inches of stretch before my shocks are bottomed out when i figure out the front i will order them. deff not going to be for a while though. this was just an update

broncofire75

I need some up front.

Bad thing is tho that my shocks bottom out from compression on one side and drop out to max too. So idk what kinda shocks I could run to get more of both lol. Iv already got 3" of bumpstop and my I still need another 3" lol.

Gonna get some straps though.

a1racer

if you look through 89elimenator's build he came up with a smart idea for the front that I stole. They are adjustable and they only cost me 40 bucks to make two differant sets.