valve adjustment
#2
Renix Super Guru
Join Date: Mar 2008
Location: In yourz postez fissin jurr spelinzs
Posts: 24,653
Likes: 0
Received 16 Likes
on
12 Posts
Year: 1990XJ/1989MJ
Model: Comanche
Engine: 4.0L Renix
If you torque the rockers to 19 ft/lbs the lifters will self adjust the valves. At least that is what I have done when re-installing the head after a blown gasket. Had to look up the torque specs but the FSM says 19 ft/lbs so that is it. Alternate between valves. I started in the middle of the head and worked my way out from there. I also turned the motor over to a place which took the pressure from the cam lobe off of the valve I was torqueing down.
HTH
HTH
Thread
Thread Starter
Forum
Replies
Last Post
sluger17
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
07-08-2023 07:08 AM
MightyMouse8
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
14
10-08-2015 08:57 AM
studmuffin
Cherokee Chat
8
10-05-2015 01:54 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)