turn signals wont work
11-28-2011, 01:27 PM
#18
CF Veteran
Join Date: Sep 2010
Location: Coos Bay, Or
Posts: 1,024
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: 4.0
The flasher is the two sliver cylinders that on the fuse box, just take both out and swap them, if the turn signals work and the hazzards dont after the swap then you need a new flasher
12-08-2011, 08:36 AM
#21
Newbie
Join Date: Oct 2011
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
12-13-2011, 11:23 AM
#22
Newbie
Join Date: Dec 2011
Location: France
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: Renault 2.1 Td
replace the turn signal assembly which is easliy accessed by removing the colum cover and steering wheel.
the turn signal lever comes out by pushing it straight in and rotating it. then pull straight out away from column.
then you can get to the turn signal switch assembly.
before doing this, have you changed out the turn signal relay located in the fuse panel?
cpnwrench
I have the same problem with my xj 1993. My Hazards work and I can hear the hazard relay clicking when they are on, this seems to be located under the dash tho, not on the fuse board (which is by the clutch pedal). I have been told the Hazard and turn signal relay are one and the same is that right? If so I assume it must be the turn signal assembly but HOW do you 'remove the colum cover and steering wheel' ??? Nothing seems to want to budge !!!!
12-13-2011, 11:55 AM
#23
CF Veteran
Join Date: Apr 2010
Location: knoxville, tn
Posts: 3,966
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 98 4.0 I6
Originally Posted by Bunsen_x
Hi Guys,
I have the same problem with my xj 1993. My Hazards work and I can hear the hazard relay clicking when they are on, this seems to be located under the dash tho, not on the fuse board (which is by the clutch pedal). I have been told the Hazard and turn signal relay are one and the same is that right? If so I assume it must be the turn signal assembly but HOW do you 'remove the colum cover and steering wheel' ??? Nothing seems to want to budge !!!!
I have the same problem with my xj 1993. My Hazards work and I can hear the hazard relay clicking when they are on, this seems to be located under the dash tho, not on the fuse board (which is by the clutch pedal). I have been told the Hazard and turn signal relay are one and the same is that right? If so I assume it must be the turn signal assembly but HOW do you 'remove the colum cover and steering wheel' ??? Nothing seems to want to budge !!!!
12-14-2011, 05:03 AM
#24
Newbie
Join Date: Dec 2011
Location: France
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: Renault 2.1 Td
Even more confused now
Hi again,
Had a look on You Tube and whilst interesting I dont seem to have the same set up as thiers perhaps this is because my Jeep xj 1993 was assembled in Europe !!??!!
However went out again this morning determined to find out what is up however I am now more confused. I took a couple of pictures but I dont know how to insert them here so I will try to explain in the hope that someone might be able to help!!!
Attached to the inside of the dash is plastic box with numerous wires leading to it, also plugged in are a number of little black boxes a big red box and a blue medium size box. When I turn the hazard warning lights on one of the little black boxes vibrates and makes a loud clicking noise, ah hah I thought this must be the hazard warning light relay so I took it out ..... the loud clicking noise was replaced by a faint clicking noise which seems to be coming from the 'door open or key in Ignition' sounder which is on the fuse board.....and the Hazards continue to flash !!!!!!!???!!! ummm
Has anybody got any ideas about what I should do next ?
Yours living in hope
Had a look on You Tube and whilst interesting I dont seem to have the same set up as thiers perhaps this is because my Jeep xj 1993 was assembled in Europe !!??!!
However went out again this morning determined to find out what is up however I am now more confused. I took a couple of pictures but I dont know how to insert them here so I will try to explain in the hope that someone might be able to help!!!
Attached to the inside of the dash is plastic box with numerous wires leading to it, also plugged in are a number of little black boxes a big red box and a blue medium size box. When I turn the hazard warning lights on one of the little black boxes vibrates and makes a loud clicking noise, ah hah I thought this must be the hazard warning light relay so I took it out ..... the loud clicking noise was replaced by a faint clicking noise which seems to be coming from the 'door open or key in Ignition' sounder which is on the fuse board.....and the Hazards continue to flash !!!!!!!???!!! ummm
Has anybody got any ideas about what I should do next ?
Yours living in hope
Thread
Thread Starter
Forum
Replies
Last Post
Aryl
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
04-10-2019 09:07 AM
BayArea93xj
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
06-11-2016 10:43 AM
ammonllewis1
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
08-31-2015 11:27 AM
rusty_bucket
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
08-29-2015 06:42 AM
CCKen
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
08-20-2015 08:07 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)