Transmission Problem
#1
Newbie
Thread Starter
Join Date: Sep 2016
Location: Corpus Christi,Texas
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.0
Transmission Problem
So I finally got my 88 running after replacing the fuel pump and ballast resistor. After I put the fuel pump in of course I wanted to take it for a drive but, when i went to put it in drive it will not move. When in drive it acts like its in neutral if you push the gas pedal it raises the RPMs but still does not go. 1-2 and reverse work just fine, I have not tried it in 3rd yet. Anybody have any ideas as to why D will not work?
1988 Limited 4x4 Im guessing it has the AW4 in it.
Thanks!
1988 Limited 4x4 Im guessing it has the AW4 in it.
Thanks!
Last edited by Zac_Lail; 01-24-2017 at 12:02 AM.
#2
Newbie
Thread Starter
Join Date: Sep 2016
Location: Corpus Christi,Texas
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.0
Also I know there was a recall for the shift interlock cable. It never got taken in to the dealership to get replaced so you can shift out of park with having your foot on the brake but I do not think that would have anything to do with this.
#3
Newbie
Thread Starter
Join Date: Sep 2016
Location: Corpus Christi,Texas
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.0
Wow no help yet haha. A little more information, I pulled the TCU fuse and it shifted fine while manually switching between the gears. Im now sure its starting in 3rd or overdrive while driving in auto it'll start moving once the RPMs are high. I replaced the TPS and its still not working right. Any help?
#5
CF Veteran
my 90 was doing this when i first bought it. i drove it like that for a few years, shifting through the gears. i thought it was the fuse, so i changed that, the tcu then transmission (i wore out the seal from another problem), then i was told to replace the TPS. that fixed it.
so your TPS may just need to be adjusted.
so your TPS may just need to be adjusted.
#6
CF Veteran
Join Date: May 2015
Location: San Antonio, TX
Posts: 1,472
Likes: 0
Received 5 Likes
on
5 Posts
Year: 1992
Model: Cherokee
Engine: 4.0L H.O.
This is going to sound crazy, but I had the same problem... ended up FINALLY solving it when I found the broken alt field signal wire in the main harness.
Love our XJs, but everything from the alternator to the brake light switch can give you weird transmission "problems".
Love our XJs, but everything from the alternator to the brake light switch can give you weird transmission "problems".
#7
CF Veteran
Join Date: May 2012
Location: Lost in the wilds of Virginia
Posts: 7,964
Received 952 Likes
on
767 Posts
Year: 1998 Classic (I'll get it running soon....) and 02 Grand
Model: Cherokee (XJ)
Engine: 4.0
TPS is easy to test. Start there. Search this forum or Youtube for how. CCKen recommends using safety pins as probes. Works great.
Also, just because it's easy and free, adjust your kickdown cable. Again, search for how-tos.
Also, just because it's easy and free, adjust your kickdown cable. Again, search for how-tos.
Trending Topics
#8
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,875
Received 1,526 Likes
on
1,238 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
#9
Senior Member
Join Date: Feb 2011
Location: NJ
Posts: 897
Likes: 0
Received 1 Like
on
1 Post
Year: 2004 WJ, 1998 XJ
Model: Grand Cherokee(WJ)
Engine: 4.7 HO
Wow no help yet haha. A little more information, I pulled the TCU fuse and it shifted fine while manually switching between the gears. Im now sure its starting in 3rd or overdrive while driving in auto it'll start moving once the RPMs are high. I replaced the TPS and its still not working right. Any help?
#10
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,875
Received 1,526 Likes
on
1,238 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
#11
Newbie
Thread Starter
Join Date: Sep 2016
Location: Corpus Christi,Texas
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.0
Wow!Thanks for all the help! @SteveMongr That was the first thing I checked it was full of fluid.
@Caged Thank you! I'll definitely adjust my TPS.
@TwistedWrench do you know which wire it was(color or location)?
@Crusier54 I dont plan on taking it haha just wanted to rule everything out.
@Caged Thank you! I'll definitely adjust my TPS.
@TwistedWrench do you know which wire it was(color or location)?
@Crusier54 I dont plan on taking it haha just wanted to rule everything out.
Last edited by Zac_Lail; 03-24-2017 at 12:43 PM.
#12
Newbie
Thread Starter
Join Date: Sep 2016
Location: Corpus Christi,Texas
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.0
#13
Newbie
Thread Starter
Join Date: Sep 2016
Location: Corpus Christi,Texas
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.0
OK so I've tried before to adjust my kickdown cable before but instead of it ratcheting into place it stays in the same location and there seems to be a thump from the cruise control cable. Any help as to why it doesn't self adjust?
#14
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,875
Received 1,526 Likes
on
1,238 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Spray lube the ratchet part til it loosens up.
#15
CF Veteran
Join Date: Aug 2011
Location: Nor-Cal Coast
Posts: 10,489
Likes: 0
Received 17 Likes
on
17 Posts
Year: 90,84
Model: Cherokee
Engine: 4.0,2.5
I don't know if it's me or both of my 90's, but that self august never works for me. (did Rubics Cube though!) I set mine manually with no tension. Sometimes I leave the thickness of a dime between that deal on the end of the cable and the lever to be sure it's not pulling on the cable.