Transmission lines, 4mm hose clamps & Jeep symbols
#1
Seasoned Member
Thread Starter
Transmission lines, 4mm hose clamps & Jeep symbols
One posts, 3 questions here...
First, anybody know where to get 3-4mm hose clamps, the spring type where you squeeze to open with pliers then let go to close again? 1/4" clamps are 6.x mm so the 3-4mm I'm looking for would be about 1/8". This is for an independent project, nothing to do with auto stuff.
Second, where do you get a Jeep symbol / moniker like this one on the back of my '96 XJ?...
And last, when I switched my radiator out last week there was no attachment point at the bottom of the new rad for one of my transmission fluid radiator lines like there was on the previous one. I guess the next best thing would be to make a bracket extension and drill a new hole and attach it directly to the truck framework where the radiator attaches. Since this is gonna get wet and hot I need to make it out of some corrosion resistant material. Best idea is to go to ole home depot and get one of those 3/4" wide by maybe 4" long silver metal brackets with holes pre-drilled. You know the ones.
So question is...which of those things is most corrosion resistant? I think I've seen some that are zinc plated. And what screws as well... ss machine screws probably?
Thanks I'm all ears
First, anybody know where to get 3-4mm hose clamps, the spring type where you squeeze to open with pliers then let go to close again? 1/4" clamps are 6.x mm so the 3-4mm I'm looking for would be about 1/8". This is for an independent project, nothing to do with auto stuff.
Second, where do you get a Jeep symbol / moniker like this one on the back of my '96 XJ?...
And last, when I switched my radiator out last week there was no attachment point at the bottom of the new rad for one of my transmission fluid radiator lines like there was on the previous one. I guess the next best thing would be to make a bracket extension and drill a new hole and attach it directly to the truck framework where the radiator attaches. Since this is gonna get wet and hot I need to make it out of some corrosion resistant material. Best idea is to go to ole home depot and get one of those 3/4" wide by maybe 4" long silver metal brackets with holes pre-drilled. You know the ones.
So question is...which of those things is most corrosion resistant? I think I've seen some that are zinc plated. And what screws as well... ss machine screws probably?
Thanks I'm all ears
Last edited by bradleyheathhays; 05-05-2016 at 12:44 AM.
Thread
Thread Starter
Forum
Replies
Last Post
ozdog210
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
28
11-24-2021 12:08 AM
00t444e
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
16
06-10-2016 09:48 PM
Lance Keltner
KL Cherokee Tech
6
05-04-2016 02:38 PM
Bakerxj
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
04-03-2016 08:53 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)