Transfer case and front drive shaft
#1
Member
Thread Starter
Join Date: Jul 2010
Location: Columbus, OH
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0 Inline 6
Transfer case and front drive shaft
My transfer case chain is slipping really bad and making awful noise when I accelerate hard. I'm gonna replace it but I don't have the money for a month or so, can I remove my front drive shaft to avoid this until I get my new np231?
#3
Member
Thread Starter
Join Date: Jul 2010
Location: Columbus, OH
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0 Inline 6
ohh i thought it would, i mean if im getting a new transfer case is it gonna be bad to drive with it being messed up?
#5
Member
Thread Starter
Join Date: Jul 2010
Location: Columbus, OH
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0 Inline 6
ok so it makes an awful clicking(sounds like a ratchet) while accelerating hard in 2wd, turning in 4hi and all the time in 4lo, it also gets stuck in 4lo sometimes. Issue has to be transfer case but im not an expert by any means so idk what about the transfer case is messed up
#6
Senior Member
Join Date: Apr 2010
Location: Tucson, AZ
Posts: 504
Likes: 0
Received 1 Like
on
1 Post
Year: 2002
Model: Grand Cherokee
Engine: 4.0 I6
The front drive shaft is very easy to remove, 4 bolts on the diff. side, then it slides right out of the t-case. I removed mine because it was turning something in my t-case, making an annoying click clack sound even in 2wd. Been driving with out it ever since just fine.
#7
Member
Thread Starter
Join Date: Jul 2010
Location: Columbus, OH
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0 Inline 6
The front drive shaft is very easy to remove, 4 bolts on the diff. side, then it slides right out of the t-case. I removed mine because it was turning something in my t-case, making an annoying click clack sound even in 2wd. Been driving with out it ever since just fine.
Trending Topics
#8
CF Veteran
Join Date: Mar 2010
Location: Broward County Fl.
Posts: 47,923
Likes: 0
Received 22 Likes
on
22 Posts
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
The front drive shaft is very easy to remove, 4 bolts on the diff. side, then it slides right out of the t-case. I removed mine because it was turning something in my t-case, making an annoying click clack sound even in 2wd. Been driving with out it ever since just fine.
#9
Member
Thread Starter
Join Date: Jul 2010
Location: Columbus, OH
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0 Inline 6
ok so i removed my front drive shaft but this clicking(rathcet like) noise is still there!!!!!!!!!!!! what could it be ahhh!!!
#11
CF Veteran
Join Date: Nov 2009
Location: Conroe, Texas
Posts: 1,262
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: I6
i got this sound when the u-joints in my rear d-shaft were going out. that was before i put a t-case drop. the u joint bearings inside were powder when i pulled them out. I dont know, something to check?
#12
Member
Thread Starter
Join Date: Jul 2010
Location: Columbus, OH
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0 Inline 6
but its only when i accelerate really hard and it sounds different then a u-joint, and it was coming from the front
#13
CF Veteran
Join Date: Nov 2009
Location: Conroe, Texas
Posts: 1,262
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: I6
only reason i said anything was because i could only hear it when accelerating hard. its probably your chain. id just take it easy till u can rip er apart.