trac bar fix or replace
#1
Seasoned Member
Thread Starter
Join Date: Mar 2013
Location: Las Vegas NV.
Posts: 461
Likes: 0
Received 1 Like
on
1 Post
Year: 1995
Model: Cherokee
Engine: 4.0 I6 High Output
trac bar fix or replace
Well guys I'm starting to get a clicking noise from the Trac bar. Only happens when I turn left. Grease the fitting, goes away for awhile then starts clicking again. Really dnt wnt it to break on a trail. So I'm looking at replacements.
I'm wondering what yr XJ, or ZJ could replace with.
I know someone with 89 Trac bar from XJ, would that work?
Specs on truck is 3.5 RE lift sitting on 32"s wild peaks.
Again thnx for taking the time to read this post and any info is appreciated.
Also would the exhaust manifold from 89 xj fit on my ,95?
I'm wondering what yr XJ, or ZJ could replace with.
I know someone with 89 Trac bar from XJ, would that work?
Specs on truck is 3.5 RE lift sitting on 32"s wild peaks.
Again thnx for taking the time to read this post and any info is appreciated.
Also would the exhaust manifold from 89 xj fit on my ,95?
Last edited by 1SIC4X4; 04-18-2014 at 05:08 PM.
#2
#3
CF Veteran
Join Date: Mar 2009
Location: Visalia, Kalifornia, ussa
Posts: 2,750
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
With 3.5" of lift you need an aftermarket adjustable trackbar.. To center the axel. The OEM bars are too short.. That said your clicking is likely from either a wollowed out mount hole and or bad bushing at the axle.. The bushing can be replaced and the hole can be repaired. The TRE end of the oem bar cannot be repaired.
Thread
Thread Starter
Forum
Replies
Last Post
Blackcherokee290
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
27
07-26-2022 07:52 PM
investinwaffles
Modified XJ Cherokee Tech
11
05-18-2021 12:02 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)