take windows out
08-10-2012, 10:49 AM
#1
Seasoned Member
Thread Starter
Join Date: Feb 2009
Location: Columbia SC
Posts: 326
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 4.0
take windows out
im cutting the rear doors at the level of where the windows drop in to the doors.
I pulled the door panels off and didnt see any "easy" ways to get the window out.
all i see are studs or something like that. Do have to drill them out to get the window actuators to slide out?
Is there a write up on how to do this? or do i need to take the barbaric way and start drilling and grinding the window out? hehe
I pulled the door panels off and didnt see any "easy" ways to get the window out.
all i see are studs or something like that. Do have to drill them out to get the window actuators to slide out?
Is there a write up on how to do this? or do i need to take the barbaric way and start drilling and grinding the window out? hehe
08-10-2012, 12:31 PM
#2
CF Veteran
Join Date: Sep 2009
Location: ☼ Blackhole Sun
Posts: 8,567
Likes: 0
Received 18 Likes
on
16 Posts
Year: My Jeep is a GMC
im cutting the rear doors at the level of where the windows drop in to the doors.
I pulled the door panels off and didnt see any "easy" ways to get the window out.
all i see are studs or something like that. Do have to drill them out to get the window actuators to slide out?
Is there a write up on how to do this? or do i need to take the barbaric way and start drilling and grinding the window out? hehe
I pulled the door panels off and didnt see any "easy" ways to get the window out.
all i see are studs or something like that. Do have to drill them out to get the window actuators to slide out?
Is there a write up on how to do this? or do i need to take the barbaric way and start drilling and grinding the window out? hehe
08-10-2012, 12:45 PM
#3
Seasoned Member
Thread Starter
Join Date: Feb 2009
Location: Columbia SC
Posts: 326
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 4.0
yeah the rivets.. i was in the microwave(garage) lastnight and couldnt pay attention if they were bolts or rivets..
Thanks
Thanks
08-10-2012, 01:33 PM
#4
Senior Member
Join Date: Jan 2012
Location: Kansas City
Posts: 596
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0L
Mine had a couple bolts that held the window to the regulator. I didn't have to do any sort of drilling. I have a 98, however.
If you pull the door panels off, then pull back that plastic film, you'll see where the window is attached to the regulator. Once it was unbolted, it came out pretty easily through the slit that it goes up and down in. Not sure if the older XJ's are the same way though.
If you pull the door panels off, then pull back that plastic film, you'll see where the window is attached to the regulator. Once it was unbolted, it came out pretty easily through the slit that it goes up and down in. Not sure if the older XJ's are the same way though.
08-10-2012, 04:00 PM
#5
CF Veteran
Join Date: Apr 2011
Location: Raymore, Mo
Posts: 2,857
Likes: 0
Received 1 Like
on
1 Post
Year: 1995
Model: Cherokee
Engine: 4.0
Mine had a couple bolts that held the window to the regulator. I didn't have to do any sort of drilling. I have a 98, however.
If you pull the door panels off, then pull back that plastic film, you'll see where the window is attached to the regulator. Once it was unbolted, it came out pretty easily through the slit that it goes up and down in. Not sure if the older XJ's are the same way though.
If you pull the door panels off, then pull back that plastic film, you'll see where the window is attached to the regulator. Once it was unbolted, it came out pretty easily through the slit that it goes up and down in. Not sure if the older XJ's are the same way though.
Thread
Thread Starter
Forum
Replies
Last Post
pmd1995
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
07-29-2017 07:58 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)