shelly24

hi everyone,

im trying to order a serpentine belt for my car but ive been given the wrong one twice. its been too short.
my cars pulley lay out is not the same as the ones i have seen on the internet.
is this normal for a 1995 4.0 petrol cherokee?



can you tell me which colour is which component?

i know red is the tensioner and yellow is the idler pulley.

thanks

NewXJaddict

Went outside to look at mine but I think mine is probably different as I have an 87

shelly24

i have a haynes manual and the diagram shows only 7 pulleys, mine is going round 8 and the diagram in the book shows air con up the top left next to idler. i thought mine has a/c but if it does the pulley isnt top left!!! aarrrgghhh confusing

R Cannon

I have two 95s. Gimme a second.

treky67

This is the belt routing on my 95 jeep cherokee with a/c....

shelly24

y is mine different? where it the tensioner pulley on that pic? i cant understand it. im assuming mine has a/c. in the dash there is a hit/cold blower control and it says air con on it. would it still say this if the car didnt have air con?
on my car the tensioner pulley is the furthest left and it goes straight down from there??!

R Cannon

Is it a right hand drive? That may be the problem.

dyte2004

you have a right hand drive jeep if im correct the tensioner is up where the ac is on the yank version i have a right hand drive yours is the same just buy a belt from jeep uk you can get them on ebay thats where i got mine real easy to change with the tensoner

dyte2004

red tensoiner
yellow idler pully
green power steering
blue fan
pink ac
purple crank
light brown water pump
grey alt

shelly24

oh ok! lol. didnt realise they would be different.
i asked jeep and they want £54+VAT !!!!!!
going to another place this afternoon. hope this one is correct!

dyte2004

take your old one with you most motor factors in the uk will carry them

shelly24

thanks 4 the help with the components! i dont have the old belt anymore, stupid me threw it away!
i tried the 3rd one and again its about an inch too short. the tensioner was all the way down and there was no stretching it under the idler pulley. gggrrrr so annoying.
im just gonna go in the shop and say give me one 1 inch longer than this!

NewXJaddict

Wow. What a pain. Once you find the right one be sure to keep the part number in a locked fireproof safe for when you need a belt again. lol.

dyte2004

6pk2475 try this part no.