sealed power lifters
05-15-2011, 05:02 PM
#1
Junior Member
Thread Starter
Join Date: Nov 2010
Location: KY
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
sealed power lifters
2000 XJ I6...I just bought a set of these and they are about 1/8 in. shorter than the OEMs, BUT if you place the pushrod in the cup of the new and OEM side by side, the pushrods are same height. Have any of you used these sealed power lifters? Have you noticed the same height difference in the lifters? Are they OK to use?
05-15-2011, 05:53 PM
#3
Seasoned Member
Join Date: Apr 2011
Location: Outside of RTP NC
Posts: 451
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Grand Cherokee
Engine: V8
It is possible to have shorter overall outside height and still be the same height inside. If its a hydraulic lifter.
If the old lifter, with the pushrod installed is the same height as the new lifter with the pushrod installed, you should be fine.
We used Sealed Power on all of our stock rebuilds at the Hot Rod shop, no issues.
Ron
If the old lifter, with the pushrod installed is the same height as the new lifter with the pushrod installed, you should be fine.
We used Sealed Power on all of our stock rebuilds at the Hot Rod shop, no issues.
Ron
05-15-2011, 06:00 PM
#4
Junior Member
Thread Starter
Join Date: Nov 2010
Location: KY
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
they came in packs of four, pulled one from each pack, all the same. could be boxed wrong. Im going to check some other parts houses to verify
05-15-2011, 06:28 PM
#5
Junior Member
Thread Starter
Join Date: Nov 2010
Location: KY
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
It is possible to have shorter overall outside height and still be the same height inside. If its a hydraulic lifter.
If the old lifter, with the pushrod installed is the same height as the new lifter with the pushrod installed, you should be fine.
We used Sealed Power on all of our stock rebuilds at the Hot Rod shop, no issues.
Ron
If the old lifter, with the pushrod installed is the same height as the new lifter with the pushrod installed, you should be fine.
We used Sealed Power on all of our stock rebuilds at the Hot Rod shop, no issues.
Ron
09-04-2013, 09:42 PM
#6
Newbie
Join Date: Jun 2012
Location: Madison, WI
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
Did you use them? Did everything work okay? I have some lifters that were listed as OE replacement on rockauto.com. They are DNJ engine components LIF1122 lifters. They're shorter than the stock ones and the grooves don't line up, just like these sealed power ones.
Last edited by MadCityXJ; 09-04-2013 at 09:44 PM. Reason: i forgot a sentence.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
madmanmarty
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
80
12-05-2015 11:21 AM
techman38
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
3
09-11-2015 06:43 PM
JamDeeper
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-08-2015 08:50 PM
canada_man
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-04-2015 11:05 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
