timing issue on a 96
07-15-2009, 07:42 PM
#1
Newbie
Thread Starter
Join Date: Jan 2009
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0
timing issue on a 96
i removed the distributor from my jeep and when i reinstalled it i got it a tooth off. when i reinstalled it, my marks are all on, the jeep idles good but starts to miss when reved up above 1500. any inputs??
07-15-2009, 09:58 PM
#2
CF Veteran
Join Date: Jul 2009
Location: Chico,ca
Posts: 2,158
Likes: 0
Received 10 Likes
on
9 Posts
Year: 89
Model: Cherokee
Engine: 4.0
I have never worked on a 96,mine is 89 with a 91 motor and the dist from my 89,I think they are timed the same,make sure it is a tdc on o degrees,then place dist where rotor is at #1,if that does not work try it just before tdc or just after,sometimes it takes a little adjusting. I knocked the dog ears off my dist to make it easier,but it not nessasary
Thread
Thread Starter
Forum
Replies
Last Post
Blackcherokee290
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
27
07-26-2022 07:52 PM
britishcolumbia
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
08-28-2015 04:08 PM
Jooman07
Modified XJ Cherokee Tech
25
08-28-2015 02:25 PM
zhunt728
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
08-20-2015 12:37 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)