Recommended control arm bushings?
#1
Junior Member
Thread Starter
Join Date: Jun 2016
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Recommended control arm bushings?
I have a 1996 Cherokee that's needs control arm bushings. I was just going to replace the control arm with tubular ones,but a cracked radiator today will be postponing that. I saw some some Energy Suspension ones on Summit that look decent,but I want to know if there's any you guys swear by.
#2
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,875
Received 1,526 Likes
on
1,238 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Have fun with that.
It's probably cheaper and easier to get stock control arms.
It's probably cheaper and easier to get stock control arms.
#4
CF Veteran
Join Date: Jul 2013
Location: Monett, MO.
Posts: 7,554
Likes: 0
Received 14 Likes
on
14 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
I tried to tell my son that but he said he couldn't afford it then and would replace the bushings instead, after almost 5 hrs......he ruined both CA's. Then returned the bushings and bought new CA's.
#5
Seasoned Member
Pressing bushings in?
My stock control arms must be really worn out. The bushings
just slip in and out. The last four or five years I have had the
new bushings spot-welded into the arms to get the Jeep through
the annual inspection. The welds break after a few weeks most
of the time. No death wobble, though.
My stock control arms must be really worn out. The bushings
just slip in and out. The last four or five years I have had the
new bushings spot-welded into the arms to get the Jeep through
the annual inspection. The welds break after a few weeks most
of the time. No death wobble, though.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)