Juvam

Hello guys
I hear from my gearbox bearing noise but I don’t know which bearing
When I press the clutch pedal the noise will go.
Anyone knows which bearing is that.


Thank you.

joe bob

most likeley the throghout bearing on the clutch. May as well do the clutch while your in there.

firstime00XJ

I would agree, although it may also be a pressure plate and when the clutch is depressed the noise goes away...Transmissions aren't my forte though...

cobb

I would definitely say its the throw out bearing. I to agree with replacing the clutch while you are in there. One, the Kit comes with a new bearing. Two it gives you an option to upgrade as well.

Juvam

Now the noise become louder & louder win I drive my jeep in any gear
the 3rd gear is the loudest & the 4th is quietest

firstime00XJ

So replace your clutch. Get it over with. lol.

Juvam

Only the clutch?

firstime00XJ

Not just the clutch, throwout bearing too...basically what everyone has told you prior to my comment. LOL

Juvam

thank you guys I will fix it this week

cobb

If you keep putting it off, it will eventualy go out and you will be forced to replace it.

Hommersimpson

Does the front input bearing go bad in these ?

svt cobra

that is the classic symptom of throw out bearing. The one in my cobra is making alot of noise as well. i only have 50k on it so im just going to do the bearing.

Hommersimpson

@ 50k id throw a disk in to...PP prob just fine.. but 50k on disk its prob gona show wear... new one cheap enough.. ..

fishtaconc

CHECK THE FLUID LEVEL!!!!! My toyota did this, whined push in the clutch no noise. 4th gear no noise, thought it was throw out bearing but checked fluid level was low but damage was already done, one morning it let go I only had 4th, found out that beings that 4th is 1:1 it is like direct drive. The shifter plate cover bolts had come loose oil leaked out over 1.5 yrs, my advise is check the level!

cobb

Not that i have heard of or seen but we are talking about bearings and they always have that chance to go out.