radio problem

Reply Subscribe

Thread Tools

Search this Thread

04-25-2010, 04:46 PM

006blackjack

Newbie

Thread Starter

Join Date: Mar 2010

Location: Dahlonega, GA

Posts: 19

Likes: 0

Received 0 Likes on 0 Posts

Model: Cherokee

radio problem

I took my doors off and completely disregarded the fact that there were plugs in the kick panels. I cut all the wires in the door without unplugging my battery and i think i blew my radio fuse or something because it wont turn on now.

Any ideas? Anyone know which fuse that would be because i dont have a diagram.

Reply Like

04-25-2010, 04:55 PM

cheromanche

Junior Member

Join Date: Feb 2010

Location: Fort Pierce FL

Posts: 57

Likes: 0

Received 0 Likes on 0 Posts

Year: 1995

Model: Grand Cherokee

Engine: 4.0 I6

you probably grounded out the speaker wire and blew the fuse, check the raido fuse in the fusebox, if that is still good you might have a fuse inline with your power wire for your radio.

Reply Like

04-25-2010, 05:32 PM

Bustedback

CF Veteran

Join Date: Feb 2010

Location: Oroville, CA

Posts: 12,367

Likes: 0

Received 19 Likes on 18 Posts

Year: 1995

Model: Grand Cherokee

Engine: 4.0 with all of the noise and clatter

Check the accessory fuse. And don't cut wires unless you have no choice.

Reply Like

04-25-2010, 06:04 PM

troy fritz

CF Veteran

Join Date: Jul 2009

Posts: 2,471

Likes: 0

Received 1 Like on 1 Post

Im not sure witch one it is but I do know its a 10 amp fuse. It will be red. You might have shorted the radio out or blew the channels. When you cut them all at once you tie them together and make them like one wire. Not good.