Pump or CONVERTOR seal
05-22-2015, 12:36 PM
#1
Newbie
Thread Starter
Join Date: May 2015
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Pump or CONVERTOR seal
Here's the back story.
1989 Jeep Cherokee 4.0
AW4
Bought jeep with no reverse for 300.
Swapped transmission
Lifted it (3inches)
265/70r16 mud tires
It just started leaking out of no where, crawled under one trans bolt had worked it self out some how, and one is missing -_- all were put on at 30ftlbs...
I started it while flexed out, and it felt like the starter was shaking the jeep(binding)
What's the damage, aside from my apartment parking lots new stains!
Is it with torque converter seal with or without "flange"
1989 Jeep Cherokee 4.0
AW4
Bought jeep with no reverse for 300.
Swapped transmission
Lifted it (3inches)
265/70r16 mud tires
It just started leaking out of no where, crawled under one trans bolt had worked it self out some how, and one is missing -_- all were put on at 30ftlbs...
I started it while flexed out, and it felt like the starter was shaking the jeep(binding)
What's the damage, aside from my apartment parking lots new stains!
Is it with torque converter seal with or without "flange"
Thread
Thread Starter
Forum
Replies
Last Post
carverdave
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
02-06-2019 08:55 AM
weswins
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
09-14-2015 10:09 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)