injector swap :)
#1
Seasoned Member
Thread Starter
Join Date: Dec 2009
Location: LaGrange, Ky
Posts: 391
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0l inline 6, bored tb.
injector swap :)
Just got done doing the 703 injector swap in my 98 xj I Love it.. As for the results now much better throttle response feels great. I will let you all know what it does for my gas mileage. Anybody who has not done it yet I recommend it.
#3
Seasoned Member
Join Date: Jan 2011
Location: brandenburg ky
Posts: 474
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: I6
Very intrested in a how to been at the jy and looked at neons but didnt know how much work was involved so i never pulled anything
#4
Junior Member
Join Date: Jan 2011
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
#5
Seasoned Member
Thread Starter
Join Date: Dec 2009
Location: LaGrange, Ky
Posts: 391
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0l inline 6, bored tb.
Not hard at all. They are pretty straight forward basically.
-move around a few lines
-unbolt the fuel rail
-unbolt the bracket that holds throttle cables to get them out of the way
-unplug injectors make sure to either mark the plugs or put them in a spot to where you know where they belong
-pull the fuel rail from the intake (will take some persuasion)
-Take clips off injectors that hold them to fuel rail
- pull out injectors
-clean out the fuel rail holes with sand paper or wire brush, or else you will have a time getting the new orings in the holes and possibly break a few orings
-reverse this with your choice injector make sure to buy all new orings for injectors
-move around a few lines
-unbolt the fuel rail
-unbolt the bracket that holds throttle cables to get them out of the way
-unplug injectors make sure to either mark the plugs or put them in a spot to where you know where they belong
-pull the fuel rail from the intake (will take some persuasion)
-Take clips off injectors that hold them to fuel rail
- pull out injectors
-clean out the fuel rail holes with sand paper or wire brush, or else you will have a time getting the new orings in the holes and possibly break a few orings
-reverse this with your choice injector make sure to buy all new orings for injectors
Last edited by 98jeepcher; 03-02-2011 at 08:26 PM.
Thread
Thread Starter
Forum
Replies
Last Post
jhc7399
Engines/Tranny/T-Case
3
10-08-2015 01:40 PM
Zerocyde
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-18-2015 09:03 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)