MNJeepInIL

Ok, so I might not be a mechanic but I absolutely cannot figure this out...

I did the budget power window fix (tap splice to tan and white wires in driver-side kick panel) which worked great.

However...

I've now got door locking issues. When I hit the power lock button on the driver door, the rear window wiper would come on. SO, I removed the tap splice thinking I did something wrong... NOW the window fix is gone AND the power locks still don't work...

In fact, when I hit the lock button on the driver door not only do the doors not lock, but the horn sounds.

I've checked all the fuses I could find. I'm really not sure what else to check. The power locks are all jacked up but I never touched anything related to them (or so I thought).

One other thought though is that I have the dash disassembled (and unplugged the instrument cluster - but since plugged it back in) so that I could repair the AC evaporator, but that was all plastic trim and screws - no electrical disconnects.

I don't get it. Please help if anyone has dealt with similar issues with their door locks.

Rearwardassist

I may be wrong but I believe it is supposed to be spliced from tan to yellow not white.

Rearwardassist

Yeah this is another thread on which wire to jump if you go down half way there is a picture
https://www.cherokeeforum.com/f2/pas...orking-134871/

MNJeepInIL

I did actually splice yellow to tan (there is no white). I should've double-checked before I mistyped.