oil filter adaptor question
02-10-2010, 08:13 PM
#1
Seasoned Member
Thread Starter
Join Date: Jan 2010
Location: Midlothian, VA
Posts: 336
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
oil filter adaptor question
im going to be doing my oil filter adaptor o-rings tomorrow and was wondering i saw a 91 where the oil filter was pointing upwards making it easier to get to, and on my 96 the filter is pointing towards the firewall. So my question is is the adaptor different on the 91 or are they the same just turned 90*, or will it hit the distributor on the 96
02-10-2010, 09:38 PM
#2
CF Veteran
Join Date: Jan 2009
Location: Baltimore, Maryland
Posts: 1,964
Likes: 0
Received 6 Likes
on
6 Posts
Year: 1994 1993
Model: Cherokee
Engine: 4.0
Ugh. One of the worst jobs I ever did on my Jeep. Finally had to hack it off with a sawzall.
Make sure you have the correct torq for the job or it`ll turn into a nighmare as there`s very little room to get anything on it and it requires a lot or pressure to turn it.
Make sure you have the correct torq for the job or it`ll turn into a nighmare as there`s very little room to get anything on it and it requires a lot or pressure to turn it.
02-11-2010, 05:14 PM
#3
Seasoned Member
Thread Starter
Join Date: Jan 2010
Location: Midlothian, VA
Posts: 336
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
well i did the o-rings today but found the adaptor cant be turned upwards it wasnt that hard, i did the adaptor and valve cover gasket in about 1.5 hours
Thread
Thread Starter
Forum
Replies
Last Post
MidwestNick
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
02-28-2016 02:05 AM
CAT_Tech2
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
67
09-18-2015 08:26 AM
Vegas101
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
0
09-04-2015 11:52 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)