non firing 95 jeep cherokee
#1
Newbie
Thread Starter
Join Date: Apr 2011
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
non firing 95 jeep cherokee
i am having a problem with my jeep cherokee not firing at all.Pulled off the coil wire not getting fire there either.I replaced the coil...wires...dist cap...rotor button...cps and still no fire.Would there be anything else that i could check b4 i shell out the money for a new ECC?What fuzes or relays would stop it from firing?By the way it is a 2 wheel drive and has a 2.5 engine...please help if yall can
#2
Member
Join Date: Aug 2010
Location: Bennett, CO
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
Year: 99
Model: Cherokee
Engine: 4L/6
Nuetral safety switch. Are you getting fuel? (fuel/spark/air is needed)
There a million no-start threads on here, keep searching and poking around the forum.
There a million no-start threads on here, keep searching and poking around the forum.
Last edited by 99KeeSport; 04-22-2011 at 09:26 PM.
#4
Member
Join Date: Jan 2011
Location: las vegas, NV
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 2.5L I4 MPI
check the tranny censers the injector censers and all the censers make sure they are all plugged in if they arnt you wont get anything good luck if you have any more problems hit me up with pm
edit: and no i start mine in first all the time
edit: and no i start mine in first all the time
#5
CF Veteran
Join Date: Feb 2010
Location: Oroville, CA
Posts: 12,367
Likes: 0
Received 19 Likes
on
18 Posts
Year: 1995
Model: Grand Cherokee
Engine: 4.0 with all of the noise and clatter
Crank position sensor, replace the f-ing crank position sensor for crap sakes! A neutral safety switch will cause a no crank problem, you have a no spark problem. Do a search on "no spark" and you will see that the crank sensor is the problem 99% of the time.
#7
CF Veteran
Join Date: Feb 2010
Location: Oroville, CA
Posts: 12,367
Likes: 0
Received 19 Likes
on
18 Posts
Year: 1995
Model: Grand Cherokee
Engine: 4.0 with all of the noise and clatter
Could be the cam sensor, the ASD relay, or the #20 fuse (I think that is the correct number fuse) under the hood. PCMs don't fail very often.
Last edited by Bustedback; 04-24-2011 at 01:13 AM.
Trending Topics
#8
Junior Member
Join Date: Feb 2010
Location: fishers, in
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0
i am having the same problem. i replaced the cps and coil and still no spark. after i did all that i was checking all my fuses under the hood and the eng control fuse was blown. i put a new fuse in there and it just pops when i turn the key on. now i put a jumper wire in the and it didnt get hot and it fired right up. i started to have all these problems after a trip up to the badlands. i went into some deep water and some mud. i was wondering if i need a new ecm. oh its a 95 with a 4.0
#9
Newbie
Thread Starter
Join Date: Apr 2011
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Come to think of it i also had a jumper wire in my fuze box too.My wife had the jeep b4 we got together and had some trouble out of it and some ppl stopped and helped her and she said he told her he fixed it temporarily.That was 8 yrs ago and come to think of it the jumper wire is not there now but i dont remember what it was jumping
#10
Junior Member
Join Date: Feb 2010
Location: fishers, in
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0
haha.. mine was jumping the eng control fuse. my buddies little kid wanted to go wheeling so i rigged it so i could take him. i was thinking about keeping it that way for now. i am thinking its a pcm problem, i just dont have the money for one right now haha
#14
Junior Member
Join Date: Feb 2010
Location: fishers, in
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0
thanks bustedback... i was changing my upper control arm bushings and we moved the o2 sensor wire and i put it back on the bracket. i am goin out there right now to check it out// thanks again man....