pressure fitting
#1
Junior Member
Thread Starter
Join Date: Nov 2010
Location: Sonora CA.
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 4.0 inline 6
pressure fitting
Hey i have a 91 xj with an ax15 and i just replaced the slave on it and the new came with a new pressure fitting already on it so i disconnected the old one and now im having a hell of a time reconnecting the new one. has andone had this problem or know how to connect it? ty
#2
Junior Member
Pressure fitting?
I'm not sure I understand your issue...
Was 91 internal or external?
You bought the pre-bled assembly?
Elaborate.
I'm not sure I understand your issue...
Was 91 internal or external?
You bought the pre-bled assembly?
Elaborate.
#5
Junior Member
Ah, it's a push type fitting.
I've had the same issue with a transmission line.
I ended up having to replace the other end of the line.
Is there another fitting between that fitting and the master cylinder? If so, I'd look into changing the line out.
I've had the same issue with a transmission line.
I ended up having to replace the other end of the line.
Is there another fitting between that fitting and the master cylinder? If so, I'd look into changing the line out.
Thread
Thread Starter
Forum
Replies
Last Post
JayneCobb
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
26
08-11-2020 03:22 PM
Ye Ol' Cherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
03-16-2019 06:51 PM
carverdave
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
02-06-2019 08:55 AM
idahomike
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
84
06-17-2016 07:39 AM
Tcq192
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
10-23-2015 09:25 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)