No oil pressure
#1
Junior Member
Thread Starter
Join Date: Aug 2011
Location: Montreal, Quebec
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
No oil pressure
Allright, I'm just about to buy an xj, and went through the problems the jeep has. Te original owner says that the jeep has no oil pressure. What could be the cause of it?
Thanks,
Alexander
Thanks,
Alexander
#2
Newbie
Join Date: Oct 2010
Location: NY
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0
could mean it's ready to blow up (dont laugh happend to me). Or as simple as the sending unit is unpluged/not working). Probably got wacked by some dumb mech when doing the oil change.
#4
☠ CF Sheriff ☠
buy a manual oil pressure gauge and test the pressure by hand. Do not buy unless you verify good oil pressure (about 30 psi at idle). No pressure or low pressure indicates the crank/cam bearings are shot. If he ran it that way for long the engine is toast.
#7
☠ CF Sheriff ☠
ooooh....you just opened up another can of worms...
2000/2001 XJs had a poor head design that was prone to cracking between cylinders 3 and 4. When this happens coolant mixes with the oil and eats the bearings up within weeks. Dollars to donuts this guy's engine bearings are shot.
Could still be just a simple faulty pressure sensor, but now knowing the year...probably not. Unless you absolutely verify the sensor is the problem, walk away.
2000/2001 XJs had a poor head design that was prone to cracking between cylinders 3 and 4. When this happens coolant mixes with the oil and eats the bearings up within weeks. Dollars to donuts this guy's engine bearings are shot.
Could still be just a simple faulty pressure sensor, but now knowing the year...probably not. Unless you absolutely verify the sensor is the problem, walk away.
Trending Topics
#8
Junior Member
Thread Starter
Join Date: Aug 2011
Location: Montreal, Quebec
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Oh no!
So I'll actually have to get my hands dirty on this one... The guy took real good care of it, it has no rust at all. 230 000 km...
I'm guessing you're right about the crack between the cylinders...
So I'll actually have to get my hands dirty on this one... The guy took real good care of it, it has no rust at all. 230 000 km...
I'm guessing you're right about the crack between the cylinders...
#9
☠ CF Sheriff ☠
yup you do.
Check a few things
1) manual oil pressure with a gauge (13-30psi @ idle)
2) check for coolant in the oil (milky goo on dipstick)
3) look through the oil fill cap at the top of the head and see if you see a crack with white goo along it.
Check a few things
1) manual oil pressure with a gauge (13-30psi @ idle)
2) check for coolant in the oil (milky goo on dipstick)
3) look through the oil fill cap at the top of the head and see if you see a crack with white goo along it.
#10
Junior Member
Thread Starter
Join Date: Aug 2011
Location: Montreal, Quebec
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Allright.
The guy tells me they are minor reparations... I honestly wonder what small is for him... I'll give those three things a look, if I can't find coolant, or cracks, where would the sensor be disconnected ?
The guy tells me they are minor reparations... I honestly wonder what small is for him... I'll give those three things a look, if I can't find coolant, or cracks, where would the sensor be disconnected ?
#11
Seasoned Member
Join Date: Jun 2011
Location: Garden Prairie
Posts: 281
Likes: 0
Received 1 Like
on
1 Post
Year: 2000, (1957 Willys)
Model: Cherokee
Engine: 4.0L
Minor? New head $450 Gaskets $50-75 (head and manifold) Head bolts, new crank and rod bearings, oil pan gasket......
If you're not mechanically inclined, have spare time, and getting it for a SONG. Walk away. I own a 2000 with 109,000 miles and just went through the cracked 0331 head ordeal.
As Nancy Sinatra " these boots are made for walkin'"
If you're not mechanically inclined, have spare time, and getting it for a SONG. Walk away. I own a 2000 with 109,000 miles and just went through the cracked 0331 head ordeal.
As Nancy Sinatra " these boots are made for walkin'"
#12
☠ CF Sheriff ☠
#14
Junior Member
Thread Starter
Join Date: Aug 2011
Location: Montreal, Quebec
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
I actually am inclined but to an extent. I don't have the room to work on an engine, neither do I have the money to spend on a big part that's crucial to the engine, right after purchasing the jeep. I'll look into the engine bay ASAP, I'm meeting up with the guy on Sunday or Monday of next week, I'll check under the hood, and I'll have a peak at his driveway, just to see if I can spot weird smudges of slime...
Last edited by kubota99; 08-07-2011 at 08:46 PM.
#15
☠ CF Sheriff ☠
if you have any doubts after you do, just walk away. It's not worth the trouble you'll go through.