cherokee blood

Does anyone have detail instructions on how to replace the clutch fan with a electric fan? I hear you can ues a fan out of taurus or crown vic. What type of new fans could you buy? How would you hook the fan up to a really and sensor? What type of hardware do you use the mount the fan?

RTorrez1

I know I have seen a couple of write ups on here. Have you tried doing a search for it? It should come up with something for you to work off.

__________________
Robert

No Info, No Help!

I had a real bad and annoying sound come from my passenger seat also. But once I broke up with my girl friend it's a LOT better...

----------------------------------------------------
1992 XJ 4X4 -- Stolen and found stripped.
1994 XJ 4X4 -- T-Boned By a lady running a red light.
1995 XJ 4X4 -- Rolled over 3 time while off road.
1998 XJ 4X4 -- Still have and going strong

meancherokee

try a chiltons or haynes manual

djb383

Loosen the fan shroud, remove the nuts from the studs where the clutch attaches to the pulley. Lift up/out from the top the old clutch with fan and fan shroud all together. Remove fan from old clutch and attach fan to new clutch. Place the fan inside the shroud and lower shroud/fan/clutch into position. Re-attach clutch to the pulley studs and re-attach shroud.

__________________
Man Law - hoods should be raised at least once a week....have a look.

freegdr

^ what he said

__________________
its all in your altitude,horn broke watch for finger

djb383

I forgot to add that a 3rd hand really helps but it can be done with 2 hands. LOL

__________________
Man Law - hoods should be raised at least once a week....have a look.

944.0

Did any of you read the post?

djb383

Good call, and I'll be switched......oh well.

__________________
Man Law - hoods should be raised at least once a week....have a look.