Rear shock mounts body side
#1
Member
Thread Starter
Rear shock mounts body side
Has anyone that encountered the common problem with broken shock mount screws on the rear shock mounts ended up welding something in place to get rid of the issue? Or done something else to fix it?
#2
CF Veteran
Join Date: Nov 2017
Location: Groton, MA
Posts: 3,695
Received 234 Likes
on
207 Posts
Year: 1995
Model: Cherokee(XJ)
Engine: I6 4.0L
When this happened to me, I noticed that a P.O. had already (poorly) welded nuts to the bottom. Being there was plenty of metal there, I drilled and tapped in some SAE 1/4" threads and secured the shocks with Grade 8 hardware. So far it's held up nicely.
#3
Member
Thread Starter
Yeah I could not get the bolts out no matter how I went after them, so I drilled and tapped new holes and secured everything with hardened bolts, just don't know how well it will hold up long term and I don't want to end up ripping up the sheet metal. I ordered zone off road bar eliminators, I may just weld those suckers up and call it good.
The following 2 users liked this post by fb97xj1:
2000_silver_xj (09-17-2019),
jpz (09-17-2019)
#5
Senior Member
Yeah I could not get the bolts out no matter how I went after them, so I drilled and tapped new holes and secured everything with hardened bolts, just don't know how well it will hold up long term and I don't want to end up ripping up the sheet metal. I ordered zone off road bar eliminators, I may just weld those suckers up and call it good.
#6
Member
Thread Starter
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)