jack points.
#1
Member
Thread Starter
Join Date: Jul 2009
Location: Seattle, Wa
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0 HO
jack points.
About to start installing a 4.5in lift doing front end first my jack only goes up to 16 inches and my jack stands are around the same maybe a little higher. Where is a good spot to jack and put the jack stands? I was thinking behind the Lower control arm but thought that might be a little too far back to stay stable? Anyone got some advice?
#2
Registered Users
Join Date: Mar 2009
Location: Pa
Posts: 1,401
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
About to start installing a 4.5in lift doing front end first my jack only goes up to 16 inches and my jack stands are around the same maybe a little higher. Where is a good spot to jack and put the jack stands? I was thinking behind the Lower control arm but thought that might be a little too far back to stay stable? Anyone got some advice?
#6
CF Veteran
Join Date: Apr 2008
Location: Lakewood, Colorado
Posts: 1,052
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1990 2dr base
Model: Cherokee
Engine: 4.0L
I use a floor jack on the axle and stands on the frame rail behind the control arm. Plus lots of blocks, i use 8" x 12" x 16" laminated beam chunks.
Thread
Thread Starter
Forum
Replies
Last Post
evguy
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
14
09-27-2015 10:58 AM
pantallica20@aol.com
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
3
09-26-2015 07:05 PM
Rambler65
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
20
09-23-2015 07:14 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)