About to Replace 01 Head. Anything Else While Im in there?
#1
Junior Member
Thread Starter
About to Replace 01 Head. Anything Else While Im in there?
Like I was saying, Im about to redo my 01 cylinder head with a clearwater head. Im already planning on replacing the thermostat. It only has 103k miles on it. Should I replace anything else while I have the head off?
#2
Senior Member
The CPS might be easier to get to from the top with everything off, at least it looked that way to me. I had just replaced mine a few months before I replaced the head. Wish I would have done them together, because the CPS is a real PITA to get to from underneath.
#3
CF Veteran
New head bolts wouldn't hurt. If you get to cleaning the intake with fluid, its a good idea to remove the tps and iac first. Ask me how I know.
#4
CF Veteran
Since you'll be into the cooling system, I'd check the water pump. They tend to get ignored on chain driven engines because you don't automatically change them when you're doing the cam belt every XXk miles. (IME, anyway).
And then when you've got the serp belt off, check all the pulleys/alt/aircon/Steering pump for play and smooth running.
That's probably a bit egg-sucky but I always forget something!
And then when you've got the serp belt off, check all the pulleys/alt/aircon/Steering pump for play and smooth running.
That's probably a bit egg-sucky but I always forget something!
Thread
Thread Starter
Forum
Replies
Last Post
98Redbird
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
10-30-2015 02:36 PM
necron99
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
12-10-2013 05:25 PM
DanInOH
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
01-11-2011 08:14 PM
Superhero
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
24
12-28-2010 09:00 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)