help: I have a 94 xj 4.0 L blows 30 amp maxi fuse for the engine control
#1
Member
Thread Starter
Join Date: Apr 2011
Location: Newport Michigan
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
help: I have a 94 xj 4.0 L blows 30 amp maxi fuse for the engine control
I have checked the wiring from the pdc to the ecm and havent found any shorts to ground has anyone had this problem...Any places to look for a issue... thanks tim
#4
Member
Thread Starter
Join Date: Apr 2011
Location: Newport Michigan
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
i changed the fuse 3 times drove it for a week . went to get lunch 1 day it blew 4 times in 10 minutes . and was fine the 35 minute drive home and hasent blown again yet .. just checked the o2sensor wiring no problems found.any thing else to check????
Trending Topics
#10
Member
Thread Starter
Join Date: Apr 2011
Location: Newport Michigan
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
I only see one o2 sensor
...I got tired of blowing the big maxi fuses made a fused jumper and using the atc 30 amp fuses till I find the issue.. The dealer ships arround here are not much help ... When I worked at a dealer I would help anyone with wiring diagrams ... These days people have changed..
...I got tired of blowing the big maxi fuses made a fused jumper and using the atc 30 amp fuses till I find the issue.. The dealer ships arround here are not much help ... When I worked at a dealer I would help anyone with wiring diagrams ... These days people have changed..
Last edited by lngliv3; 04-24-2011 at 09:54 PM.
#14
Member
Thread Starter
Join Date: Apr 2011
Location: Newport Michigan
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
but if it shorts out the check engine light should come on??? and blows fuses all the time ... semed like when the problem started it only blew the fuse when cranking the engine... We were on the way back from the hospital after having a kidney stone blasted... I was in no shape to troubleshoot it on the side of the road had to have it towed home... ughhh