Heater valve swap out
08-22-2009, 07:44 PM
#1
Junior Member
Thread Starter
Join Date: Apr 2009
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0
Heater valve swap out
I just swapped out my heater valve in my 95 4.0L and like an idiot I don't remember which hose from the heater core goes to the specific valve port. I can only hope I have the two hoses from the T-stat housing area connected correctly. Does any one have a picture of "proper" hose routing into and out of the heater valve? Thanks for the help!
Geoff
Geoff
08-22-2009, 07:49 PM
#2
CF Veteran
Join Date: Jul 2009
Location: Chico,ca
Posts: 2,158
Likes: 0
Received 10 Likes
on
9 Posts
Year: 89
Model: Cherokee
Engine: 4.0
I do not have a picture,but if you just hold it there you should be able to see what hoses line up with the outlets,if that does not help,i will take a picture of mine and post it.
08-22-2009, 07:53 PM
#3
Junior Member
Thread Starter
Join Date: Apr 2009
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0
It looks like the top of the heater core goes to the upper inlet and the bottom heater core outlet goes to the very bottom angled inlet. But for some reason I thought that when I took the hoses off they went the other way. If you have a picture (or 2) of the hoses I would really appreciate looking at it!
Thanks,
Geoff
Thanks,
Geoff
Thread
Thread Starter
Forum
Replies
Last Post
JayneCobb
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
26
08-11-2020 03:22 PM
bradleyheathhays
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
10-03-2015 09:51 PM
HappyTrails
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
6
09-14-2015 08:54 PM
Azzy
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-08-2015 10:49 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)