Head Gasket??
#1
Senior Member
Thread Starter
Join Date: Jul 2009
Location: Utah
Posts: 735
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: I6 4.0L
Head Gasket??
So i was really bored yesterday so i decided to clean the jeep. After i was done i checked the oil and the dipstick had a rusty look to it and had some white substance mixed in with the oil... I'm guessing coolant. I checked my reservoir and it was just about empty... so the coolant had gone somewhere. The only thing is my jeep seemed like it was running great. Temp gauge looked fine and everything . Could this possibly be the head gasket? Would a compression test tell me? If so what should the compression be at? Any help or ideas are much appreciated thanks!
#2
CF Veteran
Join Date: Jul 2009
Location: Chico,ca
Posts: 2,158
Likes: 0
Received 10 Likes
on
9 Posts
Year: 89
Model: Cherokee
Engine: 4.0
A compression check can tell you,it should be 120-150,but the best way to check for a bad headgasket is with a coolant pressure tester,it will tell you if the system is tight or not.
When I had the same issue I did a compression check and the effected one were around 60-90. it took about 3 months for it to go out completley.
When I had the same issue I did a compression check and the effected one were around 60-90. it took about 3 months for it to go out completley.
Thread
Thread Starter
Forum
Replies
Last Post
cpnwrench
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
02-15-2024 08:09 AM
91cherokeeSC
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
41
10-29-2015 01:49 PM
Karmageddon
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
5
10-05-2015 08:29 PM
Crazynut1997
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
15
09-29-2015 08:14 PM
Dr.Capacitor
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
09-28-2015 10:26 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)