Front bumper
#1
Member
Thread Starter
Join Date: Aug 2008
Location: Collegeville Pa
Posts: 245
Likes: 0
Received 1 Like
on
1 Post
Year: 1996
Model: Cherokee
Engine: 4.0
Front bumper
Im sorry to keep harpin on this but i have yet to get a solid answer. I really want to get Fog lights tomorrow to replace the stockers. But i need to know the easiest way to do it. there is a lot of plastic shrouds in the way and i wanna know what needs to get moved for me to install these fogs. and i only see two torxhead bolts on the bottom of the biumper and a few standatd bolts that are holding some sort of ballast on the passenger side.
#2
CF Veteran
Join Date: May 2008
Posts: 2,914
Likes: 0
Received 5 Likes
on
4 Posts
Year: 1987
Model: Comanche
Engine: I6 4.0L
I think i know what your talking about with the shrouds and they are super easy to remove just follow the edges of them and you will find little things that look like plastic plugs if you pull down on them they will come out and you will better understand how they work its hard to explain
#3
Member
Thread Starter
Join Date: Aug 2008
Location: Collegeville Pa
Posts: 245
Likes: 0
Received 1 Like
on
1 Post
Year: 1996
Model: Cherokee
Engine: 4.0
ok so after some research it seems like after taking off the end caps than there are 4 bolts disconnect the vac resivior lines and im done. can anyone confirm this.
Thread
Thread Starter
Forum
Replies
Last Post
93civEJ1
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
10-02-2019 04:08 AM
MidwestNick
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
02-28-2016 02:05 AM
RickJames Bish
Modified XJ Cherokee Tech
5
09-02-2015 03:22 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)