Fender Cutting Q's!!!
#1
Seasoned Member
Thread Starter
Join Date: Mar 2009
Location: Ohio
Posts: 416
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0 L
Fender Cutting Q's!!!
I recently took of my fender flares I realized that when I am in the mtns my fenders are rubbing my tires so I was wondering what would be the best way to cut the fenders and how high should I cut them.
#2
Senior Member
Join Date: Apr 2009
Posts: 501
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L I-6
#3
CF Veteran
Join Date: Jan 2009
Location: Aurora
Posts: 3,513
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997 XJ
Model: Cherokee
Engine: 4.0 HO JASPER MOTOR
when you do the front you need to know were you rub at full flex. i was rubbing all the way up so i cut the crap out of mine. it looks weird but it does the job.measure, mark with tape/sharpie, use angle grinder with cut off wheel. DO NOT USE AN AIR CUTTER!! Ask me how i know. DO NOT USE A SAWS ALL either!! ask me how i know. after you cut then take a poly wheel and grind it all smooth. paint if you want.
#5
CF Veteran
Join Date: Nov 2008
Location: Oak Harbor, WA.
Posts: 6,989
Likes: 0
Received 4 Likes
on
4 Posts
Year: 1987
Model: Cherokee
Engine: 4.0 liter RENIX I-6, DIY Cold Air Intake, 2.5 FM Exhaust, 3 Core Radiator
Good Job Guys!!!!!! That is the right way to handle a question that gets asked over and over again by the new guys, the come to CF for help. Just refer them to the link about what they ask without flaming them. AWESOME!!
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)