engine swap wont work...
03-21-2009, 03:58 PM
#1
Newbie
Thread Starter
Join Date: Mar 2009
Location: netherland (europe)
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
engine swap wont work...
I'm looking for a "bulkhead connector" wiring diagram for my "91 Cherokee..
It's bild in a Jeep CJ 5 with the steering kolom and all the wiring..
Now I'm seaching what cable must or musnt have power.
Its a 1
1
Country : USA
2 J
Manufacturer: Jeep (USA)
3 4
Type: MPV
4 F
GVWR (Gross Vehicle Weight Rating ) : 1819-2272 kg
5 J
Model: Cherokee - 4WD
6 7
Series: Limited oder Country
7 8
Body type 4-door
8 S
Engine 4,0 litres, I-6, HO
9 6
Control digit: Has passed check
10 M
Year: 1991
11 L
Plant: Toledo #1
12-17 582707
Serial number 582707
(sorry.. VIN decoder..)
Can someone help me??
Gr.Karel.
ps.sorry for my english..
It's bild in a Jeep CJ 5 with the steering kolom and all the wiring..
Now I'm seaching what cable must or musnt have power.
Its a 1
1
Country : USA
2 J
Manufacturer: Jeep (USA)
3 4
Type: MPV
4 F
GVWR (Gross Vehicle Weight Rating ) : 1819-2272 kg
5 J
Model: Cherokee - 4WD
6 7
Series: Limited oder Country
7 8
Body type 4-door
8 S
Engine 4,0 litres, I-6, HO
9 6
Control digit: Has passed check
10 M
Year: 1991
11 L
Plant: Toledo #1
12-17 582707
Serial number 582707
(sorry.. VIN decoder..)
Can someone help me??
Gr.Karel.
ps.sorry for my english..
03-21-2009, 04:03 PM
#2
CF Veteran
Join Date: Mar 2009
Location: Tenn. and Mich.
Posts: 28,068
Likes: 0
Received 6 Likes
on
6 Posts
Year: 2004
Model: Grand Cherokee
Engine: 4.7L V8
I wish I could help you my friend. I think you're installing a '91 Jeep eng. and harness into a What year Jeep CJ-5? Or am I wrong?
Last edited by ol"blue; 03-21-2009 at 04:06 PM.
03-21-2009, 04:11 PM
#3
Newbie
Thread Starter
Join Date: Mar 2009
Location: netherland (europe)
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Is my enlish that bad?.. Sorry.
Its going in to a CJ from 1952..
So everything must be build in..
Do you now what I mean whit the bulb conector?
03-21-2009, 04:28 PM
#5
CF Veteran
Join Date: Mar 2009
Location: Tenn. and Mich.
Posts: 28,068
Likes: 0
Received 6 Likes
on
6 Posts
Year: 2004
Model: Grand Cherokee
Engine: 4.7L V8
You need info on the bulkhead conn. at the end where it attach's to the firewall? Or do you have a section of the piece that attaches from the passenger compartment? If so you need to know which location on the connecter is for which vehicle accesory... such as starter, ign., etc.?
This info for the '91 conn. correct?
This info for the '91 conn. correct?
03-21-2009, 04:44 PM
#6
Newbie
Thread Starter
Join Date: Mar 2009
Location: netherland (europe)
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
You need info on the bulkhead conn. at the end where it attach's to the firewall? Or do you have a section of the piece that attaches from the passenger compartment? If so you need to know which location on the connecter is for which vehicle accesory... such as starter, ign., etc.?
This info for the '91 conn. correct?
This info for the '91 conn. correct?
If possible from all cables..
Where power should be.
Are there such diagrams available?
Thank for your help and patience..
03-21-2009, 05:18 PM
#7
CF Veteran
Join Date: Mar 2009
Location: Tenn. and Mich.
Posts: 28,068
Likes: 0
Received 6 Likes
on
6 Posts
Year: 2004
Model: Grand Cherokee
Engine: 4.7L V8
I will try. Meantime, here is a directory for jeeps in the UK.
Anyone else who has access
Anyone else who has access
Last edited by ol"blue; 03-26-2009 at 11:46 AM.
Trending Topics
03-21-2009, 06:06 PM
#8
Newbie
Thread Starter
Join Date: Mar 2009
Location: netherland (europe)
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
I searched all sites in Europe but we dont have that mutch info about Jeeps as you in the US..
Therefore I search on this site to see how you take down these problems and if I can get some help.
My Hynes books dont help me enough and the CJ and XJ moddels are not comparable as than I thought.
The problem is also.. here its 9 hours later then over there so I must go to sleep..
See or hear you tomorrow..
Gr.Karel.
Therefore I search on this site to see how you take down these problems and if I can get some help.
My Hynes books dont help me enough and the CJ and XJ moddels are not comparable as than I thought.
The problem is also.. here its 9 hours later then over there so I must go to sleep..
See or hear you tomorrow..
Gr.Karel.
03-24-2009, 01:07 PM
#9
CF Veteran
Join Date: Mar 2009
Location: Tenn. and Mich.
Posts: 28,068
Likes: 0
Received 6 Likes
on
6 Posts
Year: 2004
Model: Grand Cherokee
Engine: 4.7L V8
I am still searching for the electrical diagrams of the bulkhead connector that you need.
I tried this site. Have not recieved reply yet. Click HERE, fill in blanks, (sign in- it's free). http://www.fixya.com/PostQuestion.aspx?prdid=0&brdid=0&toprem=0&ref=gab
I tried this site. Have not recieved reply yet. Click HERE, fill in blanks, (sign in- it's free). http://www.fixya.com/PostQuestion.aspx?prdid=0&brdid=0&toprem=0&ref=gab
Last edited by ol"blue; 03-24-2009 at 03:17 PM.
Thread
Thread Starter
Forum
Replies
Last Post
jmarzo
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
16
10-18-2022 04:11 PM
beabout
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
14
07-06-2018 11:10 AM
Ye Ol' Cherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
10-09-2015 10:29 PM
Mmll52
Modified XJ Cherokee Tech
6
09-02-2015 10:01 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)