"2000" CHEROKEE. "NO BUSS" on dash.??
#1
Seasoned Member
Thread Starter
Join Date: Aug 2008
Posts: 298
Likes: 0
Received 1 Like
on
1 Post
Year: 2000
Model: Cherokee
Engine: 4.0L
"2000" CHEROKEE. "NO BUSS" on dash.??
I had to press the old XJ into service as my commuter because my Escape plowed a deer last week and is in the body shop.
I drive 54miles each way to work, The old Jeep never goes over a few miles from home, The Jeep is pretty nice still, but the 4.0 has a noisey lower end so I don't drive it very far, But she stepped up today.
However, On my way to work my dash went dead, No Tach, Speedo, nothing! And the odometer read "NO BUSS"
At same time the Check Engine light came on too..
I assume that means there was a communications issue with the ECM because the jeep still ran fine. I stopped and looked for any loose connectors, wiring damage etc, found nothing...
I released the steering wheel tilt lock, and banged the **** out of it up and down. Beat on the dash a little. and WALLAHH !! The dang thing came back on and worked fine...And the engine light went back off..
Two questions:
1, What exactly does "NO BUSS" Mean ?
and
2, What do you think ? Maybe as simple as a bad/ loose connector under the dash somewhere ??
I drive 54miles each way to work, The old Jeep never goes over a few miles from home, The Jeep is pretty nice still, but the 4.0 has a noisey lower end so I don't drive it very far, But she stepped up today.
However, On my way to work my dash went dead, No Tach, Speedo, nothing! And the odometer read "NO BUSS"
At same time the Check Engine light came on too..
I assume that means there was a communications issue with the ECM because the jeep still ran fine. I stopped and looked for any loose connectors, wiring damage etc, found nothing...
I released the steering wheel tilt lock, and banged the **** out of it up and down. Beat on the dash a little. and WALLAHH !! The dang thing came back on and worked fine...And the engine light went back off..
Two questions:
1, What exactly does "NO BUSS" Mean ?
and
2, What do you think ? Maybe as simple as a bad/ loose connector under the dash somewhere ??
#2
CF Veteran
Join Date: Nov 2010
Location: In the middle of Minnesota!
Posts: 5,805
Received 99 Likes
on
88 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
It is usually a cluster connection type of problem.
Check YouTube and search for JEEP CHEROKEE NO BUS. There are a number of how-to videos on how to resolve a NO BUS issue on the XJ when the engine still runs well.
You can also search this forum and any other Cherokee forum for threads on this issue; it is very common.
Check YouTube and search for JEEP CHEROKEE NO BUS. There are a number of how-to videos on how to resolve a NO BUS issue on the XJ when the engine still runs well.
You can also search this forum and any other Cherokee forum for threads on this issue; it is very common.
#3
Banned
Join Date: Oct 2016
Posts: 1,553
Likes: 0
Received 4 Likes
on
4 Posts
Year: 2000 and 1998
Model: Cherokee
Engine: 4.0
the buss is a computer communication system that goes all over the car to provide control or data. it feeds data to the cluster, all gages. its just like the usb bus on home computers, cell phones, everything!
loose connection="no buss"
loose connection="no buss"
#4
Seasoned Member
Thread Starter
Join Date: Aug 2008
Posts: 298
Likes: 0
Received 1 Like
on
1 Post
Year: 2000
Model: Cherokee
Engine: 4.0L
THANK YOU for the replies.
I figured it was something like that.
Sheew,, I wonder when was the last Jeep made that was not electronic everything ... I need an old Jeep that has a Points ignition....
BTW: Here is the video I found showing the problem...
I figured it was something like that.
Sheew,, I wonder when was the last Jeep made that was not electronic everything ... I need an old Jeep that has a Points ignition....
BTW: Here is the video I found showing the problem...
Last edited by milmat1; 03-27-2017 at 10:50 AM.
#5
Here's fix I fixed my 2000 classic
Look over by your fuse box take the cover off up in there is a ground wire I had it grounded on my dash boly but mysteriously bolt got broke then my mech had run wire to my seat bolt good ground but wire broke didn't know i had no buss and no guages when i found ground wire unhooked i hooked it back up everything works now
#6