CCV Elbow
#1
Seasoned Member
Thread Starter
Join Date: Aug 2013
Location: Duluth, MN
Posts: 452
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1999
Model: Cherokee
Engine: 4.0 I6
CCV Elbow
About to go buy my felpro VC Gasket at advanced in a little bit and figured I would get new CCV/PCV valves and grommets for when I do the job. Problem is, I'm getting confused trying to find the right part number from any threads on the forum for a 1999 cherokee so I'm looking for a little guidance.
So far what I plan on getting is
VC Gasket - VS50458R
Rear PCV elbow - 47057
Front CCV Elbow - Hopefully somebody can help me out here
2 grommets for the elbows - 42344
Anything else i'm missing here? And anybody know an actual part number for a 99(Guessing its all the same for 97+)
I've found a part number 47079 for a front CCV elbow but advancedautos website says it won't fit a 99.
So far what I plan on getting is
VC Gasket - VS50458R
Rear PCV elbow - 47057
Front CCV Elbow - Hopefully somebody can help me out here
2 grommets for the elbows - 42344
Anything else i'm missing here? And anybody know an actual part number for a 99(Guessing its all the same for 97+)
I've found a part number 47079 for a front CCV elbow but advancedautos website says it won't fit a 99.
#4
Senior Member
Join Date: May 2014
Location: Colorado
Posts: 672
Likes: 0
Received 4 Likes
on
4 Posts
Year: 2001, 1997
Model: Cherokee
Engine: 4.0L
The problem is that the parts catalogs call it PCV etc.
The rear has a restrictor on the valve cover end. The front is open. Both have the same outlet.
Generally the front elbow which is the one that usually has problem is dealer only. However, you CAN buy a rear elbow and simply use a good set of pliers and pull out the restrictor. This works with the NAPA rear elbow, which is a reboxed dealer part (with the dealer star).
Part, dealer part number, NAPA Echlin part number
Valve cover grommet, front and back 2946079 CRB 29131
Front VC elbow 53030991 CRB 29574 remove restrictor
Rear VC elbow 53030495 CRB 29574
If you remove the restrictor, the only difference is color. The front dealer part is black and the rear is gray. If you modify NAPA rear to make a front, you'll have two gray.
The rear has a restrictor on the valve cover end. The front is open. Both have the same outlet.
Generally the front elbow which is the one that usually has problem is dealer only. However, you CAN buy a rear elbow and simply use a good set of pliers and pull out the restrictor. This works with the NAPA rear elbow, which is a reboxed dealer part (with the dealer star).
Part, dealer part number, NAPA Echlin part number
Valve cover grommet, front and back 2946079 CRB 29131
Front VC elbow 53030991 CRB 29574 remove restrictor
Rear VC elbow 53030495 CRB 29574
If you remove the restrictor, the only difference is color. The front dealer part is black and the rear is gray. If you modify NAPA rear to make a front, you'll have two gray.
Last edited by md21722; 09-15-2014 at 07:12 PM.
#6
Seasoned Member
Thread Starter
Join Date: Aug 2013
Location: Duluth, MN
Posts: 452
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1999
Model: Cherokee
Engine: 4.0 I6
The problem is that the parts catalogs call it PCV etc.
The rear has a restrictor on the valve cover end. The front is open. Both have the same outlet.
Generally the front elbow which is the one that usually has problem is dealer only. However, you CAN buy a rear elbow and simply use a good set of pliers and pull out the restrictor. This works with the NAPA rear elbow, which is a reboxed dealer part (with the dealer star).
Part, dealer part number, NAPA Echlin part number
Valve cover grommet, front and back 2946079 CRB 29131
Front VC elbow 53030991 CRB 29574 remove restrictor
Rear VC elbow 53030495 CRB 29574
If you remove the restrictor, the only difference is color. The front dealer part is black and the rear is gray.
The rear has a restrictor on the valve cover end. The front is open. Both have the same outlet.
Generally the front elbow which is the one that usually has problem is dealer only. However, you CAN buy a rear elbow and simply use a good set of pliers and pull out the restrictor. This works with the NAPA rear elbow, which is a reboxed dealer part (with the dealer star).
Part, dealer part number, NAPA Echlin part number
Valve cover grommet, front and back 2946079 CRB 29131
Front VC elbow 53030991 CRB 29574 remove restrictor
Rear VC elbow 53030495 CRB 29574
If you remove the restrictor, the only difference is color. The front dealer part is black and the rear is gray.
Trending Topics
#8
Seasoned Member
Thread Starter
Join Date: Aug 2013
Location: Duluth, MN
Posts: 452
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1999
Model: Cherokee
Engine: 4.0 I6
The problem is that the parts catalogs call it PCV etc.
The rear has a restrictor on the valve cover end. The front is open. Both have the same outlet.
Generally the front elbow which is the one that usually has problem is dealer only. However, you CAN buy a rear elbow and simply use a good set of pliers and pull out the restrictor. This works with the NAPA rear elbow, which is a reboxed dealer part (with the dealer star).
Part, dealer part number, NAPA Echlin part number
Valve cover grommet, front and back 2946079 CRB 29131
Front VC elbow 53030991 CRB 29574 remove restrictor
Rear VC elbow 53030495 CRB 29574
If you remove the restrictor, the only difference is color. The front dealer part is black and the rear is gray. If you modify NAPA rear to make a front, you'll have two gray.
The rear has a restrictor on the valve cover end. The front is open. Both have the same outlet.
Generally the front elbow which is the one that usually has problem is dealer only. However, you CAN buy a rear elbow and simply use a good set of pliers and pull out the restrictor. This works with the NAPA rear elbow, which is a reboxed dealer part (with the dealer star).
Part, dealer part number, NAPA Echlin part number
Valve cover grommet, front and back 2946079 CRB 29131
Front VC elbow 53030991 CRB 29574 remove restrictor
Rear VC elbow 53030495 CRB 29574
If you remove the restrictor, the only difference is color. The front dealer part is black and the rear is gray. If you modify NAPA rear to make a front, you'll have two gray.
If I can rip off the restrictor from the advanced one I'll just go with that one. Thanks again.
#9
Senior Member
Join Date: May 2010
Location: Johnson County, Kansas
Posts: 701
Likes: 0
Received 1 Like
on
1 Post
Year: 1995
Model: Cherokee
Engine: 4.0 HO
Don't over complicate this. I got new ones from Oreilly. They were Dorman parts. Front part #47079, rear part# 47057. I don't have a # for the grommets.
#10
Seasoned Member
Thread Starter
Join Date: Aug 2013
Location: Duluth, MN
Posts: 452
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1999
Model: Cherokee
Engine: 4.0 I6
Is there something wrong with being 100% on what I'll need when doing the gasket on my daily driver that I'll need the next day?
#12
Senior Member
Join Date: May 2010
Location: Johnson County, Kansas
Posts: 701
Likes: 0
Received 1 Like
on
1 Post
Year: 1995
Model: Cherokee
Engine: 4.0 HO
Hmm, 47057 is listed for jeep,1994-2004, and dodge 94-03. 47079 is listed for the dodge only. It is the open one with no restricter. These are the one that I am currently using and will continue to use. They should work fine for you. Not sure why 47079 is no longer listed for jeeps.
#13
Seasoned Member
Thread Starter
Join Date: Aug 2013
Location: Duluth, MN
Posts: 452
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1999
Model: Cherokee
Engine: 4.0 I6
Hmm, 47057 is listed for jeep,1994-2004, and dodge 94-03. 47079 is listed for the dodge only. It is the open one with no restricter. These are the one that I am currently using and will continue to use. They should work fine for you. Not sure why 47079 is no longer listed for jeeps.
#15
CF Veteran
Join Date: Aug 2011
Location: Nor-Cal Coast
Posts: 10,489
Likes: 0
Received 17 Likes
on
17 Posts
Year: 90,84
Model: Cherokee
Engine: 4.0,2.5
You can just plug it and drive to work, as long as the large tube is free to vent to the air cleaner. The CCV can wait a few days until it's in stock.