cb location
#1
Member
Thread Starter
Join Date: Jan 2009
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
cb location
I have a cobra model 29 cb. where is the best place to locate it? And if in the headliner, what hardware should i use so i don't go through the roof? btw I have a 01.
#2
Senior Member
Join Date: Jan 2009
Location: Redford MI
Posts: 836
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1999
Model: Grand Cherokee
Engine: 4.0
I mounted mine between the visors and used 3/4 " long screws. Pre drill them also. In the first pic you can see the brkt is alligned with the frt of the visor "clips" there is metal framing in this spot under the headliner. Make sure you mount it to this area.
#7
Member
Join Date: Apr 2009
Location: Phoenix Az
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
This is where I have mine located that way it protects my noggin in case of a roll over or flopping on my side ...Besides I hated the cord flying around inside the jeep & the mic falling down
Trending Topics
#9
Member
Join Date: Dec 2008
Location: Mountain Home, ID
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1985
Model: Cherokee
Engine: 2.5L Carb
I am going to mount my 29 like grn99 did, my antenna is now mounted where the factory tire carrier bracket was on the right side.
#10
CF Veteran
Join Date: Feb 2009
Location: birmingham,england.
Posts: 1,983
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0 ltr
got mine in the overhead console, cant find pics at mo, but its nice and out the way.
but you do loose the garage door opner draw and sunglasses draw thing.
but you do loose the garage door opner draw and sunglasses draw thing.
#11
CF Veteran
Join Date: Feb 2009
Location: socal
Posts: 7,244
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
#12
Member
Join Date: Apr 2009
Location: Phoenix Az
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
I will post a picture up soon on how I ran my ant. wire on my 01 I had a soft plug that I manage to feed the wire threw I will ck on pre 97 if you can go threw the tail light assembly that way your not pinching the ant. cable