NewKindOfClown

Back into the 80s, at least. Good catch

Cane

I seem to have a leak somewhere on my fuel tank. I checked online a bit and still trying to figure out if I should venture into this. So a couple questions :

-If my fuel pump is fine, do I have to change it? I looked around and the whole assembly is worth more than the tank itself. I get 50psi when I check fuel pressure. Normally I'm all about changing everything while I'm doing a job like that, but $$ is kind of an issue and since there is no apparent issue with the pump..
-I guess the fuel filter should be changed?
-Do I need a new lock ring or does the old one still works? New one is like 85 bucks online for the ring alone.
-I heard the 1996 is tricky sometimes, anything I should know?

cheers

joeyjeepz

i did a search and came up with nothing, any one know where i can find a parking break (e-break) tensioner, i have 5 speed e break is not working as intended, and the tensioner is rusted, i don't want to break it, i would like to buy a new one
thanks

gunmetal_nightrider

Are there any junk yards near you? This is the assembly you mean correct?

Irishjoy13

Hope this is the right place to ask this question: how do I fix the front windshield wipers on my 1991 xj? Replaced motor, not the prob., can't find a fuse, everything else on wiper switch ( directionals, brights) works great. Had work done on ignition wiring though, they haven't worked since then, mechanic wants to charge me for 18-20 labor hours to find prob. HELP!

joeyjeepz

Yes that is the one, yea im gonna check at the junkyatd, thanks, i wonder if i remove it and wire wheel it, you know clean it up a bit

NewKindOfClown

If you can't find a better one locally, try looking in the Classifieds section. There may be somebody out west/southwest who has a rust-free XJ being parted

joeyjeepz

A rust free one would be awesome! Im gonna check it out! Thanks

gunmetal_nightrider

If ya get in a pinch hit it with pb blaster and let that soak for a day, hit it again, another day. Wire brush it to help unbolting, then try getting it off. If things look too crusty leave it alone until you get a new part. Best of luck buddy. Even Rockauto doesnt have that assembly. New brake line, adjustment for each line to the rear....but not that thing.

dogkatcher

my digital meter cross checking pins on cps connector pins

2000k setting for ohms

A-B = 238

A-C = 544

B-C = 200



when on 2000 -> setting

between all pins .. get a brief random number, then infinite


faulty cps? I really need a good multimeter, but think this showed something wrong with cps

rcguymike

Anyone know what the canister is off the top of their heads?

Link to full res
I've checked just about everything else except the line inside the dash and still stuck on window defrost. Hoping it's not the switches. Why are they sooo expensive?! Thanks!

NewKindOfClown

I'd assume it's the vacuum canister. Could be an airbag crush can or maybe even a charcoal canister, but I'd guess vacuum.

odgreen

My recommendation would be to post that in the zj section next time.
To answer your question it's the charcoal canister.

cruiser54

I don't have a canister off the top of my head.

Do you OD?

odgreen

No