iconr6

i have and 98 xj now and a 94 zj with a v8 what parts could i use or save off the zj like window swithes or axles... will the recever hitch fit off the zj,, what about any other parts at all???

winston427

Tie rod and pitman arm. The V8 ZJ tie rod is a solid unit and is much stronger than the stock XJ tube type. The pitman arm is a 1 inch drop over a stock XJ and will help correct steering angles when lifted.

93XJRay

the front coilsprings from the zj will give your xj about 2" lift.

smtippin

You can swap in the seats (I do not recall if poser options pose issues) but the rear seat takes some persuading and some leg room gets lost. Search the forum for it.

s

double_ot_xj

what parts can you keep? it really depends on how creative you are and your level ov fabricaion skill/tools. it also depends on your plan. do you want your XJ to climb Mt. Everest or the curbs at the mall. If i had a spare ZJ lying around i would probably rape and pillage it till i cant find useful things anymore (im talking about keeping sheet metal because i "might" need it one day to fill in rust or make the inside of half doors, and i dont want to buy sheet BC im a cheap bastard). after that i would sell off/ part out the damn thing and only give the junkyard a skeleton covered in moss. but thats me thinking in an ideal world. my driveways full and have no area around me to store a rape victim.

hedbutter

i usually put them in the trunk/cargo area

housew

depending on the rear ends in your rigs you could use the zj rear to upgrade your xj to rear disc.

iconr6

alrdy sittn on 4.5 rub lift on 33s but i want to save anything i can

REWSTER

part it out, use the cash for XJ parts

OnlyInMyXJ22

Or just sell it.

1SickCherokee

Yes the hitch will fit but the holes do not line up to well so you will have to drill new holes. I know. I had a zj hitch on my xj because i got it for free

iconr6

stock 98 rear end and 94 gc with a v8 will the rend bolt right up so i can swap the disc to disc breakes

FlexdXJ

NO the ZJ has coils in the rear. It will be a direct swap after you cut off the coil mounts and weld on leaf spring mounts.