89 Cherokee no spark
#1
Newbie
Thread Starter
Join Date: Jul 2011
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
89 Cherokee no spark
Hey guys, I have got a problem!!!! I recently pulled the engine, a 4.0 multiple point fuel injection engine. After the seal change and the oil pump rebuild I put the engine back into the vehicle. Everything seeems ok when I crank it over but there is no spark. The coil checks out the crank shaft position sensor was messed up (shorted and exposed wires) which I have replaced. The out put from the ECU seems to be ok but there is still no spark. Short of replacing the ECU, coil, ICM I cannot find any faults. Any ideals on what's going on?
#2
CF Veteran
Join Date: Jun 2011
Location: S.E. Tx
Posts: 1,845
Likes: 0
Received 2 Likes
on
1 Post
Year: 1992
Model: Cherokee
Engine: 4.0 I6 firepower ignition, cat-back w/ magnaflow muffler, poweraid tb spacer, optima blue top
Try checking your distributor cap and rotor. Also check the wire running from the coil to distributor.
#3
Senior Member
Join Date: Mar 2010
Location: Florida
Posts: 919
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
Thread
Thread Starter
Forum
Replies
Last Post
Blackcherokee290
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
27
07-26-2022 07:52 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)