1995 XJ blower fan wiring help
#1
Newbie
Thread Starter
Join Date: Apr 2012
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0L
1995 XJ blower fan wiring help
I've had this jeep for almost 2 years. Blower Fan was always a Hi-only and I dealt with it. A few months ago it goes out completely. I find the blower resistor shown below with lots of burning. I opened up the dash a few days ago and there was burning around the fan selector switch. I replaced the resistor and put a new yellow female spade connector for the burnt voltage. Turned it on the blower sort of worked for a minute, then stopped and yes a burning smell. Is this a bad blower motor problem thats pulling too much? For the few seconds the motor ran it did sound a bit labored but i was thinking because it hadn't run in a while.
#2
CF Veteran
Join Date: Aug 2011
Location: Blue Springs, MO
Posts: 1,031
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1993
Model: Grand Cherokee
Engine: 4.0L Laredo
When the blower resistor fries it's normal to have high speed only.. The high setting doesn't use the resistor, it's a direct connection. I'd say your blower motor is bad.
Thread
Thread Starter
Forum
Replies
Last Post
shotseven
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-06-2015 03:06 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)