Can I swap out a 95 trans crossmember/mount on my 00?
#1
Member
Thread Starter
Can I swap out a 95 trans crossmember/mount on my 00?
2000 XJ. I banged up my trans crossmember when I was wheeling and my friend gave me a crossmember off his parts Jeep. Its a 95. The trans mount didnt line up to the holes in the crossmember, I guess because some are offset and some are centered?
Can I just grab the mount off his 95 and use the 95 crossmember on my 2000? Or is there a good reason for the difference?
Can I just grab the mount off his 95 and use the 95 crossmember on my 2000? Or is there a good reason for the difference?
#2
Seasoned Member
You can use the 95 mount and 95 crossmember together on the 00-01.
From a post by fb97xj1 on another thread on the forum:
From a post by fb97xj1 on another thread on the forum:
Different part numbers. The 00-01 mount is centered. The 99 and older are offset. You can use the 00-01 mount on a 99 or older if you also use the crossmember for the 00-01, or you use the 99 and older mount on the 00-01 if you use the crossmember for the 99 and older. Use the wrong mount or crossmember and the transmission wont line up.
Thread
Thread Starter
Forum
Replies
Last Post
Thax
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
09-19-2014 02:00 AM
1arunem
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
04-20-2014 06:27 PM
1arunem
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
03-31-2014 11:34 PM
Fanmanj
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
06-28-2011 08:42 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)