Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

Replacing the front axle seals

Old 05-27-2012, 09:53 PM
  #1  
CF Veteran
Thread Starter
 
my89xj's Avatar
 
Join Date: Sep 2011
Location: Frederick, MD
Posts: 10,447
Likes: 0
Received 0 Likes on 0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
Default Replacing the front axle seals

Well I'm pretty sure my seals are bad. After putting the car in 4low for the first time in it's life i think they blew. I searched for a how to write but could only find rear axle. I have an 89 xj.
Old 05-27-2012, 10:09 PM
  #2  
CF Veteran
 
Turbo X_J's Avatar
 
Join Date: Sep 2009
Location: ☼ Blackhole Sun
Posts: 8,567
Likes: 0
Received 18 Likes on 16 Posts
Year: My Jeep is a GMC
Default

What symptoms?
Old 05-28-2012, 07:11 AM
  #3  
CF Veteran
Thread Starter
 
my89xj's Avatar
 
Join Date: Sep 2011
Location: Frederick, MD
Posts: 10,447
Likes: 0
Received 0 Likes on 0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
Default

You first see how some shot onto my tire,and them I show were all the fluid is sitting.

Name:  IMAG0158.jpg
Views: 1246
Size:  60.2 KB



Name:  IMAG0157.jpg
Views: 1191
Size:  87.3 KB
Old 05-28-2012, 07:48 AM
  #4  
Seasoned Member
 
RenegadeT's Avatar
 
Join Date: Apr 2011
Location: GSO NC
Posts: 328
Likes: 0
Received 0 Likes on 0 Posts
Model: Cherokee
Engine: 4.0L HO
Default

the front seals are all the way in the center housing. Cliff notes...remove diff cover, drain gear oil, then to then remove wheels, brakes, unit hub w/axle shaft attached. Back to the center, pull the carrier, with a long stick/pole knock the seals from outside in, pop new seals in, reassemble.
Old 05-28-2012, 07:50 AM
  #5  
Seasoned Member
 
RenegadeT's Avatar
 
Join Date: Apr 2011
Location: GSO NC
Posts: 328
Likes: 0
Received 0 Likes on 0 Posts
Model: Cherokee
Engine: 4.0L HO
Default

oops...89XJ...you should have the passenger side disconnect axle, that adds a little confusion, but same general steps I outlined.
http://www.stu-offroad.com/axle/yjd3...jconvert-1.htm
^ might help you understand what you're getting into
Old 05-28-2012, 08:48 PM
  #6  
CF Veteran
Thread Starter
 
my89xj's Avatar
 
Join Date: Sep 2011
Location: Frederick, MD
Posts: 10,447
Likes: 0
Received 0 Likes on 0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
Default

So am i ok to drive with them as long as I don't go into 4. And there's to seals which ones do i change? And since mines an 89 it shouldn't have the vacum?

Last edited by my89xj; 05-29-2012 at 05:57 AM.
Old 05-29-2012, 02:07 PM
  #7  
CF Veteran
Thread Starter
 
my89xj's Avatar
 
Join Date: Sep 2011
Location: Frederick, MD
Posts: 10,447
Likes: 0
Received 0 Likes on 0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
Default

Ok so I've done some research I do.t have the vacuum, but there's the inner outer and tube seal, I'm guessing if its leaking there all bad?
Old 05-29-2012, 04:39 PM
  #8  
CF Veteran
 
Turbo X_J's Avatar
 
Join Date: Sep 2009
Location: ☼ Blackhole Sun
Posts: 8,567
Likes: 0
Received 18 Likes on 16 Posts
Year: My Jeep is a GMC
Default

Originally Posted by my89xj
Ok so I've done some research I do.t have the vacuum, but there's the inner outer and tube seal, I'm guessing if its leaking there all bad?
If there is an outer & inner the best idea is to replace both seals while your there.
Old 05-29-2012, 06:54 PM
  #9  
CF Veteran
Thread Starter
 
my89xj's Avatar
 
Join Date: Sep 2011
Location: Frederick, MD
Posts: 10,447
Likes: 0
Received 0 Likes on 0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
Default

This is the website i always use to order parts, i just dont know what i need, theres a hundred different seals listed.http://www.jeep4x4center.com/jeep-ax...herokee-xj.htm
Old 05-29-2012, 07:19 PM
  #10  
CF Veteran
 
Turbo X_J's Avatar
 
Join Date: Sep 2009
Location: ☼ Blackhole Sun
Posts: 8,567
Likes: 0
Received 18 Likes on 16 Posts
Year: My Jeep is a GMC
Default

First is it a Dana 30 w or wo vacuum disconnect? If you don't know take a pic.
Old 05-29-2012, 07:28 PM
  #11  
CF Veteran
Thread Starter
 
my89xj's Avatar
 
Join Date: Sep 2011
Location: Frederick, MD
Posts: 10,447
Likes: 0
Received 0 Likes on 0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
Default

I'm positive its without vacuum, ill take a pic regardless.
Attached Images  
Old 05-29-2012, 09:52 PM
  #12  
CF Veteran
 
hbracing13's Avatar
 
Join Date: Sep 2011
Location: new mexico
Posts: 1,874
Likes: 0
Received 1 Like on 1 Post
Year: 88
Engine: 4.0
Default

When you see it you'll know if you have the vac or not. If it not vac the seals are super easy to R&R . If vac unit the dirver side is easy the passanger side is a different story I have to make a tool to get that seal in.
Attached Thumbnails Replacing the front axle seals-forumrunner_20120529_205044.jpg   Replacing the front axle seals-forumrunner_20120529_205133.jpg  
Old 05-29-2012, 10:37 PM
  #13  
CF Veteran
 
Radi's Avatar
 
Join Date: Apr 2012
Location: Wisconsin
Posts: 5,302
Likes: 0
Received 19 Likes on 16 Posts
Model: Cherokee
Default

Originally Posted by my89xj
So am i ok to drive with them as long as I don't go into 4.
Watch to make sure the axle doesn't run dry, and that the brake pads don't get wet.
Mine is leaking very slightly too....I have it on the round 'tuit list for now. Not quite bad enough to motivate me and I have to do the u-joints anyway....

Good luck!
Old 05-29-2012, 11:09 PM
  #14  
Junior Member
 
XJcountry's Avatar
 
Join Date: Jun 2010
Location: Chicago, IL
Posts: 83
Likes: 0
Received 0 Likes on 0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 L6
Default

Here is a link to how to do it.. http://naxja.net/forum/showthread.php?t=937821

Last edited by XJcountry; 05-29-2012 at 11:15 PM.
Old 05-30-2012, 08:13 PM
  #15  
CF Veteran
Thread Starter
 
my89xj's Avatar
 
Join Date: Sep 2011
Location: Frederick, MD
Posts: 10,447
Likes: 0
Received 0 Likes on 0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
Default

Do you guys have some brands you trust, I don't really know what's good and what's not, also I'm on a highschool budget
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Wybuck
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
17
01-30-2024 08:59 AM
SixShooterXJCherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
09-23-2015 06:27 PM
Hewittxj
Modified XJ Cherokee Tech
35
08-31-2015 04:43 PM
BillyBoy
Cherokee Chat
5
08-26-2015 01:43 PM
HuntinXJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
08-23-2015 04:09 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread
Quick Reply: Replacing the front axle seals



All times are GMT -5. The time now is 10:01 AM.