XJPRO

XJ rock sliders, easy installation, all hardware included... available in any length you want... $175 plus shipping

XJPRO

15% off introductory price thru December

Bustedknuckle

Damn. Specs??

XJPRO

Made from 2x4 11 ga., they fit tight up against the pinch weld screwing thru that into the inside of the slider, then 8 3/8 self tapping screws thru the frame rail, they stick out about 1.5" and are finished with Bedliner like my bumpers... estimated install time 30 minutes, these are 60" long run from stock flare to flare but can make them longer apon request... also available in 2x6 for $25 more, and you always do have the option of bolting them thru the frame rail but with the brake lines being place where they are on our XJ i prefer the self tapping method

harleys

pics of them installed?

XJPRO

just got them build for a customer, he will post pics when he gets them installed

Bustedknuckle

Any way to leave the ends unfinished for welding purposes?

XJPRO

Yeah I can do that

2kxj1

if anyone needs any other pictures let me know.... I didn't mount to the pinch weld I used 8 bolts to the frame, I'll mount to the pinch weld before I take it offroad. Very strong and well built sliders and a great price.

LeRoy90laredo

How much for shipping to 85226?

jscusmcvet

Did you use a backing plate on the other side of the uniframe rail? Have you hit them off road yet and did your mounting hold up to it? These are just what I am looking for, but honestly don't understand how the uniframe hold up to the leverage, on this or other mounting systems.

Thanks,

John

XJPRO

they also bolt thru the pinch weld but his pinch welds were to rusted out... i built a pair for my step son and he beat on them good

99 Purple XJ

If i didnt buy the JCR stage 3 i would of bought these

2kxj1

I did not use a backing plate and have not had them offroad yet (installed them last week), I will figure a way to get them through the pinch weld before I beat on them, but the design is good and as soon as I can get them through the pinch weld they will have no problem taking a beating. They are beefy and a great price!

xjchris

So if were to buy these in 1 month from now. Would they be able to withstand being beaten? Are you running these on your xj? if so, how have they held up. I will buy a set within a month or 2. How much for shipping to 97124?