The Ruffstuff NOT Universal 4 Link Kit!
#19
Former Sponsor
Thread Starter
Join Date: Mar 2008
Location: Sacramento (Rubicon) Ca
Posts: 2,087
Likes: 0
Received 0 Likes
on
0 Posts
We're pulling the XJ into the shop again in about 3 weeks to do the rear suspension. We decided that the coilover issue is very difficult for most so we are going to make a kit that makes it much easier...Watch for it
#24
Former Sponsor
Thread Starter
Join Date: Mar 2008
Location: Sacramento (Rubicon) Ca
Posts: 2,087
Likes: 0
Received 0 Likes
on
0 Posts
Honestly, if most of my driving was on the street I would use a bushing at one end to dampen road vibration. We can adjust any kit to do just that!
#25
Not that I should be considering a linked rear end quite yet since I'm still on a short arm lift kit. But nothing wrong with adding more, "wants" to the lists.
It would also help if I learned how to weld. Thanks for the response.
It would also help if I learned how to weld. Thanks for the response.
#26
Former Sponsor
Thread Starter
Join Date: Mar 2008
Location: Sacramento (Rubicon) Ca
Posts: 2,087
Likes: 0
Received 0 Likes
on
0 Posts
We are working on an interesting XJ kit, we don't move as fast as I woud like but we do it the right way and I think you will like the way its going!