NPx

Sure the CF10 10% discount is still active. However, Flat Flares are currently only available for the 97-01 XJ in Four Door or Two Door. (email also sent)
Thanks, Doug

NPx

Thanks to Ben A. for this picture of his XJ. Our fender flares leave room for rock rails. Plus, it's clear that Ben doesn't mind pushing through some pretty tough stuff without being too concerned about breaking the fender flares!



Get your V2 Fender Flares at Napier Precision Products and get 10% off. Towards the end of the checkout process enter the code: CF10

NPx

Thanks to Adam V for this photo of his 2 door XJ.




Get your V2 Fender Flares at Napier Precision Products and get 10% off. Towards the end of the checkout process enter the code: CF10

NPx

Thanks to Larry for posting this pic of his XJ with our V2 Pocket Flares!

NPx

Thanks to Blaine for posting these pics of his 2 Door XJ with JCR Bumpers!

jswift716

Do you make a set of the flat flares that would work with the fold in the rear? I just looked on the site and found a set but after I fold the back of the rear quarter theyll hang down past and free float and id hate to have to cut them and ruin the clean look they have.

NPx

Hey, thanks for the question. We are actively working on creating Flat Flares for XJs with the lower rear quarter panel cut-n-folded up and under. As you've seen, we've got a working prototype but have to transform that into a proper mold. Keep an eye on our website and forums for the announcement. Wish I could offer a date but this is a super busy time of year so probably 4-5 weeks.

jswift716

Thanks for getting back so quick ill Deffinitly keep an eye out

NPx

Yeah, you're right a 4 door, without regular doors, would look awkward with our V2 Fender Flares. But use our new Flat Flares and it wouldn't be an issue at all since they don't mount to the door.

jswift716

I kinda wonder if two sets of fronts would work on the cut and fold... hmmm

NPx

The answer to that is, "no". lol

NPx

They are probably a bit tougher in how they mount. The screws are located around the underside of the flare. There is also an "insert" that mounts to the sheet metal and goes inside the flare. The insert keeps the top of the flare from trying to move around. The V2 Fender Flares don't have that.

Here's a view of the insert.


Then here you can easily see the flange underneath the flare for the screws and how much sheet metal cuts out to fit bigger tires.

2000CHERO

Love the vents, will be getting the flares in a year and a half when I get 35's.

NPx

Very nice work on your XJ!

NPx

The Napier Precision Flat Flares really turned out well. Here's Justin D's XJ with our Flat Flares. They leave room for rock rails and don't mount to the rear door.



Get an instant 10% of your fender flares (and other stuff) on the Napier Precision website. Use the code: CF10