HD 231 TC shift linkage from Boostwerks!
02-01-2015, 01:12 PM
#31
Seasoned Member
Thread Starter
Join Date: Nov 2011
Location: Co
Posts: 343
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1999
Model: Cherokee
Thanks!
Bryson
02-01-2015, 04:30 PM
#32
CF Veteran
Join Date: Jan 2013
Location: west chester, pa
Posts: 19,216
Likes: 0
Received 39 Likes
on
35 Posts
Year: 1999
Engine: 4.0
Yes, however you will need to extend the throw of the shifter and cut down the threaded rod roughly an inch. I can ship you the additional hardware for $12 if needed. You can paypal me at: Boostwerks@hotmail.com. Thanks! Bryson
02-04-2015, 11:36 AM
#33
CF Veteran
Join Date: Sep 2009
Location: Grand Prairie, Texas
Posts: 1,142
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1998
Model: Cherokee
Engine: 4.0 HO I6
Getting ready to install SYE and clock my case. This will make getting it all back together so much easier. Ordered, thanks!!
10-21-2015, 12:39 AM
#39
CF Veteran
Join Date: Oct 2013
Location: Tarpon Springs, FL / Denver, CO
Posts: 2,097
Likes: 0
Received 8 Likes
on
7 Posts
Year: '98
Engine: 4.0 I6
Does anyone know if the 231 + manual trans kit will fit with a 1" to case drop?
I have a 98 XJ, AX15 + 231 with a 1" transfer case drop and the stock linkage is trashed.
I have a 98 XJ, AX15 + 231 with a 1" transfer case drop and the stock linkage is trashed.
10-21-2015, 12:12 PM
#41
Seasoned Member
Thread Starter
Join Date: Nov 2011
Location: Co
Posts: 343
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1999
Model: Cherokee
He said earlier in the thread that you'd need the 242 kit with the 1" case drop.
10-21-2015, 05:49 PM
#42
Junior Member
Join Date: Oct 2014
Location: PHX, AZ
Posts: 91
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1993
Model: Cherokee
Engine: 4.0L
I had a 1" drop and when I put in the SYE and took out the 1" drop, my linkage must have been stretched out and loose. I was having problems with the TC wanting to pop out of 4Low when going downhill.
I purchased the Boostwerks kit for a manual transmission. It took a little trial and error to get it all lined up correctly. But it has been working like a charm since. Shifting the TC is solid and I have had no problems with it wanting to jump out of gear.
I recommend this to everyone.
I purchased the Boostwerks kit for a manual transmission. It took a little trial and error to get it all lined up correctly. But it has been working like a charm since. Shifting the TC is solid and I have had no problems with it wanting to jump out of gear.
I recommend this to everyone.
