I am not trying to bad mouth about your product but I bought the oil pan from your website on Dec and it did not fit right. It took me about 3 hours trying to guide the bolts (because 1 bolt did not fit properly), I tried all different combination but that bolts still did not want to go in properly and that was Saturday, I then bored the hole on the oil pan a little larger (may be by 1/16") and finally I was able to tight all the bolts. Couple day later the small amount of the oil leaking in the front of the oil pan near the pulley. Note the hole that I bored out near the transmission (did not leak). I called customer service to report the oil leaking issue and they told me that since the oil pan has been modified they cannot exchange. Doesn't matter what I tried to explain they don't want to exchange.
I ordered the new OEM oil pan and gasket from local Jeep dealer and it took me less than 30 minutes to install all the bolts (it fits right on and perfectly).
Honestly I always use OEM parts for all my vehicles. I purchased from your company because I tried to support the forum supported vendor but it doesn't work out for me.
1993 XJ 4.0L
2004 Durango Hemi 4x4 4L --> SOLD
2005 Honda CBR1000RR
2008 Husky TE510
My project build